Honda Spree and Elite 50 Forums

I have a 21mm on my red sr elite with a malossi cast bore and I'm putting a 24mm on my next build (94 elite S), which is going to be a polini corsa. All just depends on how you jet it.

Badass build man!!
Nice r1 too- is it your track bike?

I have a set I'll sell you pm me for more info.

^^ AGREE^^^
I love my new cast iron malossi bore- I does have a alittle more umph- than the polini.

WOW that is beautiful!!!!!!!
Love the white!!!

Are you still using the arreche carb? I was going to use my arreche 19mm and swap out my 21mm oko, so I can use the auto choke on the arreche. What do you think?

WOw I can't remember when we could in january. It's too bad weather changes so quick around here!

I bought a new Toro 2T last year since the 4T's aare starting to take over theier line-up had to have one more 2T before they become exstinct!

I haven't decieded yet. I've really working on the honda -got the new michelin tires on the metro wheels-installed the v8 pipe. I took it out and gps's it 49.9 mph almost wide open. It was pretty windy too, I think it's not to shabby for stock gears, wind, and my 260+lb * on it :) Next step have the...

Yep better gears in the 08 engine. I'm going to use the technigas pipe -just need to get a new variator for it and get it all tuned in.

The zuma is a 2002- but I pulling the engine and putting a 2008 engine in- the crank's stripped on the outer varaiator fan and the nut is welded to the end of the crank. It has alot of parts on it-so I'm stripping it down and transfering the malossi 70cc clutch, arreche carb-to the new engine. I hav...

Yep got it a couple week ago. I put a gates belt on it but I think it's slipping. Probably going to switch back to th yamaha belt. I just bought a zuma too! Lot's of aftermarket parts but I'm making it stock.

I hope to have it running before winter. But just take my time this winter building it the rest of the way. I usually have a sport bike project during the winter, but sold the 07' R6 I had just rebuilt and bought this as a fun winter project. I have my Jog to ride, but was changing the rear trans oi...

I have polini one ordered for it and awaiting delivery! Thanks While I was at it I ordered a OKO 21mm carburetor, throttle cable, ct intake, pod filter, 8.44 gears. I have alot of winter project for me. I still have a KOSO clutch, new Keli variator, outer aluminum ramp, polini belt, 1000rpm tourque ...

Plug is wet. compression test was at 60psi
I pulled the head off and the top gasket must have got trapped inbetween when I was installing it. DO I have to replace it with a polini gasket or can I just use any 2 inch o-ring gasket? I sure hope this was my problem of it not starting.