Honda Spree and Elite 50 Forums

Thank you bear. It's just my ignorance acting up again. Went ahead and put the 40pilot/115main in and needle clip at center. Almost came out from under me tonight. I think I'll leave it there and see tomorrow when there's less cold air. Still gotta close off the K$N air filter about 60%.V Dude

Hey rushu, good job on the work done. Looks like a challenge to get this straight. Good to have help with it too. Nice pics, sorry, can't advise to try and save those motor mounts, just replace 'em, I think Babbitts online has 'em for 6.85 each, plus freight. You'll have to carefully use a hacksaw b...

Hey Turtle13, I knew you would be looking at this post. I was excited as * when it finally got straightened out with the 19mm. :smile: This bore is really a 45mm(exact) that I got from Patrick (Daywot.ebaymotors.com) So did you find any air leaks? I looked at the video and will be testing mine from ...

Double check the bystarter for proper function. I took a carb. apart once and the bystarter valve was missing, no wonder it didn't work! Also try a compression check. Low compression will also cause it to stall out. Make friends with a mechanic. Best of luck to ya. V DUDE

While I was working on too many things at once, I managed to pull this 65cc motor and clean the sh-t out of it,lots of carbon on top of piston and exhaust port but cyl. was NICE and CLEAN, so, well I broke one of the taiwan piston rings!!! * am I gone to do now! No spare parts to be found! Thanks to...

Welcome fellow scooterist! (That's "scooter-enthusiast"). Read your post. Have to agree with Mystic that it sounds like more air than fuel. Stock carb was meant to be used with stock air box. The keihin pa35j carburetor has a non-adjustable pilot jet installed that works with the "ugl...

OKO-10-pack-idle-jets-carb-1.jpg anyone know a cheap quick place to order some assorted jets or anyone have some for sell? maybe 85, 90, 95, 100 main and 35 38 and 40 pilot ? :D Why don't you try the folks you obtained the OKO carb from, or you could try these folks; http://www.treatland.tv - reall...

what kind'a tires are you gonn'a run 70 mph wit. just curious.
maybe link to where you get them too?

Thanks Wheelman. tricky little things these carburetors.I'll try those out in the a.m. I purchased all the sets of jets for these oko's. I will post the results and share any tips I may stumble upon
v dude Yup, I was sure I had something afoul Thank you Baka

OK, thanks. 42 pilot is right. good up to 1/2 throttle, then blaaaah. no power. I don't think it's getting enough gas. tried an 85-even less power. must need to go up? getting late, I'll mess with it again tomorrow. it was real good up to 1/2 throttle. made sure no leaks (air). still have a question...

Thanks Baka, I went up to second clip and seemed to help. I went down on the main jet to a 95 and that helped too. Set a/f screw to 2 turns out. Warmed up and went 300 ft. at 1/2 open then throttle dropped to very little response. pulled choke on and was better response. Pushed home. Is there someth...

Thanks Baka. The plug is dark wet. Was a 42 in there and I guess too rich. 38 is the smallest pilot jet in the set. That is what is in there now. Still sort'a damp-it idles but with very little response. Is there supposed to be an opening for the oil line? Seems there is a nub w/ a hole in it mid wa...

First of all, I want to thank this board for all the help you all have given me.I am in awe of all the mods I've looked at. You are incredible!!! I almost gave up on fixing these until I saw this site! THANK YOU ALL! :worship: Got ahold of a new 19mm OKO carb and ct manifold. Using the cable from VT...