Search found 2006 matches
- Fri Jun 30, 2023 1:47 am
- Forum: General Discussion
- Topic: Spree won't do a thing after carb clean
- Replies: 29
- Views: 3532
Re: Spree won't do a thing after carb clean
Pay attention to “how” it dies. Does it sound like its sputtering and bogging before it quits? Like getting flogged with excess fuel?…or does it just suddenly die like you just hit the kill button? Next ride, go with the body panels off and bring a tool to remove the spark plug and gloves (hot motor...
- Fri Jun 30, 2023 1:43 am
- Forum: General Discussion
- Topic: Spree won't do a thing after carb clean
- Replies: 29
- Views: 3532
Re: Spree won't do a thing after carb clean
Try a different CDI. When they go wonky they do weird things. Stay away from the cheap ebay “racing” CDI’s. Get a nice used OEM one and try it. I have a box full of them somewhere in storage. If it wasnt buried in 1 of 100 bins I would just give you one.
- Thu Jun 29, 2023 5:36 pm
- Forum: General Discussion
- Topic: Spree won't do a thing after carb clean
- Replies: 29
- Views: 3532
Re: Spree won't do a thing after carb clean
Symptoms dont sound electrical but I wouldnt rule anything out until its running right. Fuel, fire and air…one of those isnt happy. What main jet is in there? I dont remember stock Spree size but I recall it being tiny…like 68 or something. Been a long time since I messed with the Spree motor.
- Wed Jun 28, 2023 7:55 am
- Forum: General Discussion
- Topic: Spree won't do a thing after carb clean
- Replies: 29
- Views: 3532
Re: Spree won't do a thing after carb clean
Frustrating, I can relate. The issue is always something simple but not exactly obvious. Diagnosis is always 90% of the repair so just keep digging for it. Have you gone over everything under the belt cover? Maybe a slipping belt, cooked clutch, glazed bell, c etc… I had a faulty petcock once that w...
- Tue Jun 27, 2023 5:06 pm
- Forum: General Discussion
- Topic: Spree won't do a thing after carb clean
- Replies: 29
- Views: 3532
Re: Spree won't do a thing after carb clean
Check fuel delivery. Possibly faulty petcock or cracked/leaking vacuum hose to said petcock. Maybe blocked fuel line. Could be an air leak at one of 20 different places allowing air to suck in when revved but not at idle. Check every connection theres a gasket or rubber o-ring….bystarter, carb top c...
- Mon Jun 19, 2023 12:46 am
- Forum: General Discussion
- Topic: Proper selettra ignition for Honda Dio/Elite
- Replies: 5
- Views: 1181
Re: Proper selettra ignition for Honda Dio/Elite
FYI, the Stage6 one is junk. I tried it and actually LOST performance.
- Mon Jun 19, 2023 12:45 am
- Forum: General Discussion
- Topic: Proper selettra ignition for Honda Dio/Elite
- Replies: 5
- Views: 1181
Re: Proper selettra ignition for Honda Dio/Elite
In my experience building over 20 sport/race motors on the af16 platform, the cdi upgrades do little-to-nothing for performance. The stock Honda cdi keeps up with 11,500 rpm’s just fine with no noticeable spark lag. This is on fully built motors with ported engine cases, ported race bores, ported in...
- Wed Jun 14, 2023 9:48 pm
- Forum: Builder's workshop
- Topic: Dio af18 project🔥
- Replies: 33
- Views: 5713
Re: Dio af18 project🔥
Porting isnt necessary to make it rip. The Corsa is amazing for bolt-on and go as is. If you were going to do any porting you’d need to crack open the cases and remove the crank while you do it. Then do the boost port and some other small internal bits while youre in there. Its not worth the effort ...
- Tue Jun 13, 2023 11:08 pm
- Forum: General Discussion
- Topic: 86 SPREE ....GOOD NEWS ...BAD NEWS
- Replies: 5
- Views: 1536
Re: 86 SPREE ....GOOD NEWS ...BAD NEWS
Also, if you have jumper cables you can hook it to your car and start your Spree if the battery is weak. Just dont have the car running while you do it. The Spree doesnt like the 14.4v a running car will give. Leave the car off for a 12 volt jolt! If you have an electric car…I have no idea. Try at y...
- Tue Jun 13, 2023 10:55 pm
- Forum: General Discussion
- Topic: 86 SPREE ....GOOD NEWS ...BAD NEWS
- Replies: 5
- Views: 1536
Re: 86 SPREE ....GOOD NEWS ...BAD NEWS
Four things for starter to work: 1, key on 2, red button switched to “run” 3, left brake lever pulled and held (can be locked on via parking brake tab) make sure rear brake light illuminates brighter when lever is pulled. 4, press starter button If that doesnt work then you have issues like: bad sta...
- Mon Jun 12, 2023 4:47 pm
- Forum: Builder's workshop
- Topic: Dio af18 project🔥
- Replies: 33
- Views: 5713
Re: Dio af18 project🔥
If it doesnt like your oil mix, it will let you know pretty quick. Too much oil will either be fine, run like crap or not run at all. Its the “not enough oil” that will break stuff. Lol Be sure to hondabond the heck out of the oil plug before you shove it in. They have o-rings but somehow still leak...
- Sun Jun 11, 2023 6:07 pm
- Forum: Performance Technical
- Topic: 1987 se50 elite mlm pipe.
- Replies: 3
- Views: 1468
Re: 1987 se50 elite mlm pipe.
Dont look at it as having seven…its 42g total. Getting the Malossi yellow contra would improve the shift curve as well. That stock spring is well worn by now and isnt doing you any favors.
- Sun Jun 11, 2023 12:28 am
- Forum: Performance Technical
- Topic: 1987 se50 elite mlm pipe.
- Replies: 3
- Views: 1468
Re: 1987 se50 elite mlm pipe.
If I remember right, the stock rollers are like 12g or something crazy. Been a minute since I weighed them. Its a sound investment to buy a cheap digital meth scale on Ebay. I think mine was less than $20. Keep in mind that you can mix-n-match different weights in the vari as long as they are evenly...
- Sat Jun 10, 2023 6:03 pm
- Forum: Builder's workshop
- Topic: Dio af18 project🔥
- Replies: 33
- Views: 5713
Re: Dio af18 project🔥
zapperaf28 wrote: ↑Sat Jun 10, 2023 2:27 am Got the rims in the mail today
https://i.imgur.com/nUZ3XTk.jpg
- Thu Jun 08, 2023 3:27 pm
- Forum: Technical Help
- Topic: 2000 Elite SA50P Not Running After Initial Repairs/Service
- Replies: 5
- Views: 1364
Re: 2000 Elite SA50P Not Running After Initial Repairs/Service
Heavier rollers than stock would hinder your take-offs. The stock rollers are way too heavy as it is. Get the yellow malossi contra spring, some 9:1 gears, a decent variator and some 6g rollers.