Honda Spree and Elite 50 Forums

So the 87 has a 3 pin and the 84-86 have a 2 pin flasher relay. Is the 3 pin on the 87 only 3 pin because of the noise clicker? Looking to get an LED rear light set up but need to know what kind of flasher relay to get... 2 pin or 3 pin. And when i do, do i just completely replace my relay/noise fla...

No I have a stage 6 pod filter on there. Never ran without it. I was just thinking of the polini with that plastic cover thing to restrict some air flow as Meatball was suggesting.

Thanks bonez. I am running Honda GN2 oil. I have been trying to be careful and pretty much let off when the temps start climbing. Yes i feel i need to put more miles on her. I checked for leaks again at temps so everything seems to be in order. Just skeered lol. jets are 45/118 right now its been an...

Yes I am running 32:1 premix on premium. I am on my 3rd tank. At the WaWa on the way home before she died lol! A Yammy R1 pulled up next to me at a light and said "What the f*ck is that?" ROFL! http://i1133.photobucket.com/albums/m591/R1titan911/20170219_154726_zps6w0lcbf2.jpg I trimmed my...

Got her running again, i think i ran her out of gas... Tank looked like it had some in it but remember this is still my first spree so still learning even the simple things lol. Plug was fouled, put a new 8HS ngk, cleaned the carb, checked all the bolts, BRAAP. While i had the carb off i went ahead ...

Did some longer cruising yesterday. At WOT Temps got up in the high 370s and scared me a bit.. Took her back home and upped my main jet to 114 (was at 110) and it is still the same. Turned my idle screw out about 1/8 and still the same. I know these bores can take a beating but I shouldn't be over 3...

Jealous....

benji wrote:I think you need clutch springs, maybe lighter rollers. Put in the powerband before the clutch engages or else it's bogging down.

I may try the 5G rollers or mix 5/6. I think everything is running perfect. I wont know if im limiting anything until i check my revs. I agree with the clutch springs.

Don't we get front row parking all the time anyways...anywhere?

Speaking of handicap, did you notice that some drive thru ATMs have braille? Just as long as scoot controls don't have braille, life's good.

How much do you weigh? I'm 6'1" 230LB smushing that little Spree down to Earth lol. Currently on the 6G rollers the polini came with & Yellow Contra on a stock clutch. Have to get my speedo magnet installed and install my tach wire so i can check my revs. From all the stories and builds i h...

Finally got to stretch her legs. :naughty: Same results but hauls you know what. 1/4 Throttle Cruise 220-250 1/2 Throttle Cruise 250-290 WOT 315-350 Suprisingly, the plug is nice and brown! http://i1133.photobucket.com/albums/m591/R1titan911/Screenshot_2017-02-16-18-48-36_zpsecyghqx9.png She gets to...

Dood that Kyrlon Fusion is my can of choice haha. Good stuff

Yea i had to sand some corrosion off my bulbs but its an 1157 for the tail and 1073 for all 4 blinkers. I read that 2057 can be used in the 1157 place but is dimmer. But shouldn't not be done vice-versa since the 1157 draws more power (doubt it matters for our applications lol).

Nice i just hooked up my rear lights too just to check. Signals work but tail doesnt. I cant seem to find the automotive part number for spree bulbs anywhere >< Does your prebug use like 1156 & 1157 bulbs?

Awesome! I am so over these heat cycles and just want to get on it haha!