Honda Spree and Elite 50 Forums

I also have an eye out for a Kriti blue spree.

I have one that has been sitting in my garage for 15 years, It needs a piston and a set of rings.

Its a lot more fun putting things back together! https://beta-static.photobucket.com/images/v87/ntonar/1/ca366bcc-6080-4207-a223-83369d8e027b-original.jpg?width=1920&height=1080&fit=bounds https://beta-static.photobucket.com/images/v87/ntonar/1/38238c15-9170-419d-9c5c-d5e8fb200b6c-original.j...

Engine is ready to be built! Gears are in and parts are coming. Here is the list... -Corsa Top end/Studs -Arrow Exhaust -Naraku Manifold -Polini 24mm Carb/Filter/Jets -Polini Variator -Malossi Contra/Belt and NYC Blue Clutch Springs -16x42 Gears Thinking of doing the Vapor Temp/Tach https://beta-sta...

Not much to do in the winter so I plan on building the motor.

Meatball wrote: ↑Fri Oct 26, 2018 5:43 pm Sweet....now toss a Corsa/Arrow/Naraku/Stage6 on there and do 65!

I am about the bite the bullet and build this engine over winter. I just wanted to make sure I order the correct parts, so you are talking....

Corsa,
Top end

Arrow,
Exhaust pipe

Naraku,
Big valve intake

Stage6,
Carb?

hmm what springs to try first? Green are 5k and the uncoated are "stock"

I am in the same boat, starting trans mods currently. Keep us posted on the results!

I am going to start with a Polini Variator and 15x42 gears, they should be here next week. I do not believe the 15*42 secondaries (10:1) will improve enough to be worth all the trouble. Try the 16*42 set (9:1) and increase the strength of the springs in the clutch for a better take-off. Here's the ...

I am going to start with a Polini Variator and 15x42 gears, they should be here next week.

Printed one today, thanks for the file!

Meatball wrote: ↑Thu Oct 25, 2018 5:30 pm Running good?

Running Great!

This was the last time out for the year.

I have, just double checked to make sure I installed the #80 jet and confirmed it. I guess I am going to add more holes till she is runs the best and buy a new plug to insure the air/fuel mixture is ideal.

So I took her for another run today (a bit cooler outside) and was topping out around 32-33mph. After going down a hill the engine choked out so I am thinking either too much fuel or too much air. I plug some holes on the cover and it bogged very early and wouldn't get up to speed. I opened the fuel...