Honda Spree and Elite 50 Forums

:drama: Well, similarly, I was out late last night for a quiet ride on the daily rider, pushing 50 for about 9 or 10 miles, took a stop at idle, when I rode off again it felt like it was hot and "missing" fire or low fuel in the bowl, just as you described. So I limped it home, sputtering ...

Plug the vacuum nipple on the af16's intake manifold.

I like those. That is alot of work!
Thanks for showing them, we all need inspiration to finish what we start.
And no stickers, cool.

Happy Trails!!!

Welcome. Your story sounds familiar. You can click this link http://hondaspree.net/wiki/index.php5?title=Main_Page
to find the manual for your particular scooter, then download it and read it so you will become more educated on the subject. Hope you will find your answers here, and Happy Trails!

Hey Ben, I think it is the normal operating mode for that particular unit. I have one on my daily rider and it flashes the max. temp every 6 seconds, then goes back to current temps. I think it says this also on the package. Have not had any other issues so far since May of this year. Of course I he...

Does anybody know of an aftermarket front rim that will bolt on to an 01 elite. Mine is bent and if i have to pay $50 for a new "used" one then i might as well do something that i like. Difficult to find aftermarket drum brake front wheel, but for about $70 you can buy a brand new "s...

He says it sounds meaner my money is exhaust leak of some sort I have to agree it sounds like air leaking into the motor. Look for a small amount of oil seeping out somewhere, like at the gaskets on the intake or the carburetor. Check to see if your air filter is still in tact. I have had that happ...

Boy, that CZ400 was just too much! Happy 4th to all of the gang here at hondaspree.net.
Congrats to all you Tony Stewart fans, I guess he got it done on Saturday nite!
I did like the Danica commercials though!!!

Happy Birthday Mike! Have you gone past 40 yet???

Yes, what an excellent finish on Father's Day. Sr. would be proud!

http://www.ebay.com/itm/Honda-DIO-50cc-125cc-performance-Big-bore-kit-Elite-SK50-SA50-SR50-/330736952595?pt=Motorcycles_Parts_Accessories&hash=item4d01756513&vxp=mtr (bbk) http://www.ebay.com/itm/PULLEY-AERO-NB50-VISION-NE50-TACT-LEAD-1-UPGRADE-EZ-5-7-MPH-JUMP-/261021083727?pt=Race_Car_Part...

Have you rode it yet? I had one that did the same thing after changing the bearings. After riding it some, it freed up and I could turn it by hand. Maybe the bearings hadn't seated at first. Also, I would not use other thickness gaskets than stock. Hope this was helpful to you.

Yes that does help I think I will order the gasket but might do a little test cruising with it off so when people run it without the clutch cover do you just need to periodically check for moisture or gas/oil I would say yes, check often. Use some drain line on the overflow nipple from the carburet...

The oil and gas that drips into that area causes the gasket to become larger and seemingly impossible to re-install properly. You don't want any debris or moisture in the clutch/drive belt area, especially oil and/or gas. To reduce that possibility, I have used black rtv sealant to seal it up when n...

Ayden, nice work on the scooter! Looking like new.
I made a choke lever from a wire coat hanger, works beautifully!
Hope you find this useful: