Honda Spree and Elite 50 Forums

Made a mount for my gps, it's a piece of sheet metal I bent and drilled a hole to mount off the side mirror.

Hi, Did you ever figure out the needle bearing part number or did your local bearing shop find something suitable? I got the part number off mine and ordered one from ebay. INA HK1412 http://www.ebay.com/itm/INA-HK1412-Needle-Brg-Drawn-Cup-Bore-14mm-OD-20mm-/222277837192?hash=item33c0caa188:g:AVoAA...

This build turned out very well, congrats! I recently acquired another Aero 50 with low compressing and had a similar swap idea, as I have a spare Aero 125 chassis and motor sitting in storage, I need something to keep up better with my partner's Aero 125 :thumbwink: . How do you like the performan...

benji wrote:Looks good!

Thanks man, I still have plans to improve the look of my aero. But it's came along way since I bought it last fall when it looked like this:

motormike wrote:...Tyler VR: sleeper King.

Trying out 2 different type of air filters, not sure which is best but I've always used foam filters in the past..

I'm using the storage area for a spare battery for my stereo system.

The other side panel has the storage trunk that I cut the back side out and sunk it in, but then my new shocks had to be spaced out so I ended up just cutting square out for clearance. Also trimmed the bottom edge of the panel because the exhaust header was touching it. http://i766.photobucket.com/a...

The side panel didn't really fit well after the intake and carb upgrade. I was planning on bulging the panel out with a heat gun but there was already a crack so it wasn't doable. I just cut it out around the carb and put some edge trim on, at least I can reach the choke easily. http://i766.photobuc...

Installed the intake and carb, need to spend time re jetting and tuning but it runs.

Here's my big carb and manifold setup. I decided to go with a 28mm oko, someone else online claimed 70 mph with this setup on their nh125.

I had to sand the mounting flange on the ct manifold I bought last year, I plan on doing the same on this new one. Also planning on sanding the reed cage flanges on this one, I didn't do that on my last manifold and I suspect it leaked between there even with grey silicone. Here's a pic of my last i...

I started to work on a intake manifold adapter plate to run a dio ct intake and larger carb. Got the holes drilled and countersink on the adapter, need to tap threads and angle the port hole.

The under glow led lights with the body panels on.