Honda Spree and Elite 50 Forums

Right then, what do you wreckon I do with the silencer? Iv roughly made the exhaust, making the pipe bigger as I go along to compensate the longer pipe, but silencer? Leave it alone and just weld it up? I'd like it shorter but will it ruin the engine? Still standard motor but it be running a small s...

My melody in progress

Still building my Melody

Haven finished exhaust yet, only routed it round the head so far? I'm going to run a small sports filter of some kind to free up some space, then somehow fit exhaust above it? It will be tight, but going to hardtail the rear anyway so that make it easier

Cool as * mate

Been doing little bit more work, exhaust being a nob, wherever I place it, it's out of place and blocks my wheel, so I'm in the middle of making one coming round the head, and it be coming out behind the carb, so at least the right hand side will have a clean view, you can just see the pipe in my pi...

It looked a lot of work, but he sent me pics, he built the cases up with weld, then machined the new ports in them, used a 80 rod for the bigger small end bearing, but as its longer, he made a spacer, and now it's an animal for a little 70 pulling power wheelies http://i569.photobucket.com/albums/ss...

Yeah the stroke is quite different to others Iv looked up, Iv ordered a +1mm piston, so il get it rebored and try it, next step is find a suitable carb?

Hi, Iv picked up a 1983 Honda lead (aero in states) needs new piston and rebore at least, and I haven had the head with it yet? So what I'm wondering is if anyone fitted a different tuned top end on one? Like aprilia/ piaggio it would also open up lots of tuning routes then too? Someone here fitted ...

Look how cool the alloys are

Looking forward to rebuilding the engine for my other melody

Rip_City_Spree wrote:Can you take a pic from the rear? And looking great nice work

This is the best I can do in my little shed

Picked up the 125 Lead from my mate, didn realise they roll on alloys? Real retro, love it! Head and carb are missing, but should find a head, and going to run bigger carb anyway so I'm well chuffed as it was free :-) http://i569.photobucket.com/albums/ss140/bobspeed_album/vivaro/E63B5D9C-B038-4EC5-...

I'm looking for a 50race pipe local cheap to modify and plan the mounting? The race pipes are normally a lot lighter, also going to pick up the 125 2 stroke honda later, but that be for my other melody where are your videos? See loads on YouTube but mainly ruckas, or zoomers here in uk

Cheers, I redone my mount dinner time today, brought it back in 9mm, should be right now? The stretch as such is just 20mm I still want the wheel to fit under all the original number ate holder, with the massive indicators, trying to keep it looking original apart from lower, and wide rear wheel :-)...

Well two steps forward, one step back, managed an hour on it tonight, fitted most wiring and throttle/oil pump cables, oiled them all up first, then noticed my rear wheel isn't dead centre? It's nearly 10mm offset too far, so stripped it back down and hopefully modify it tomorrow so I can carry on t...