Honda Spree and Elite 50 Forums

The mystical Elite S Driveshaft. Now I need to find one more for my Aero!!!

Honda50 wrote: ↑Sun Oct 20, 2019 6:14 pm Thanks for the info. What size jet did my SA50 come with?

I assume the restricted version is the same as mine, 82. When I was doing the same thing, I swapped to the unrestricted size (Elite S or Elite R in 1987), which is 85, but I only had 84 and 86.

Oh, if you go unrestricted, make sure you jet up from the stock 82 to 84-86.

Use the unrestricted pipe, if it is from and Elite S or an Aero. You can’t unrestrict the restricted pipe (easily), there is no washer.

Heres the good vari set-up: https://www.ebay.com/itm/85-87-Honda-Aero-50-KELI-Race-Variator-Performance-Pulley-Kit-w-Race-Ramp-Plate/173996344356?epid=24029088962&hash=item2882fd8424:g:q3QAAOSwFA5bSeaL Unrestricted SE50 exhausts can also be found on Ebay but be ready to pay dearly. Theyre scarc...

I need an Aero for my wife, who's got one?

I also created a SSS speed pulley shim mod to allow users to change the ratio and allow for tunability. I took 1.5mm off the back of the pulley so it will slide further onto the crank. This is a list off pulley stacks. Whatever you take off the back otf the pulley, you double the distance between th...

I am looking for some dimensions of the output shaft off the engine (crank). I need to know the diamter of the shaft that the inner drive face pulley rides on (front pulley).

Currently the rear pulley is stock.

Hmmm.... maybe it’s sounding like I should try lighter weights just a hair to keep the revs up. I put the pipe and jet in before the Keli and it picked up about 5mph just on revs alone....maybe I am thinking about this the wrong way. I guess that is the fun, experimenting!

Ok, I have a Keli variator and am getting ready to install +1000 clutch springs this weekend. I’m currently running 7g rollers and it seems like the shifts are “behind” so I’m going to go every other weight to an 8g roller. I have a tach and a Technigas pipe (basically the S model now), what RPM sho...

I also vote powerdercoat....but I have my own set-up.

You guys should make a shim kit for this pulley, so it would be adjustable changing the back-side and face dimension. I love the pulley, but it's just a bit too much for a guy my size. This way you could add some to the face, and remove some from the back and have a corresponding ratio change. It wo...

I know this thread is ancient, Brownstown, MI.

Have any of you used a static balance for wheel tire assemblies? Looking at purchasing one, since small vibrations @ 30mph are becoming larger at 40+mph.

There are a ton of choices on ebay, but looking for experiences. Let me know.