Honda Spree and Elite 50 Forums

Well, locked her up tight on the way to work today. Guess I'll have to port the 55mm LC cylinder. My trail tech spark plug sensor was showing 275 or so when she had enough. The bore must not be dumping enough heat into the LC head. Hopefully there isn't any garbage in the crank. The pump seems weak ...

It's my 56mm air cooled cylinder with just the head from my new 55mm round kit. The water flows out of the bottom of the radiator on the left side, through the pump, into the head and out on the right side, then up to the top of the radiator on the right. I'm waiting on a coolant catch bottle to com...

Finally keepin it cool! I've road it more this week than I have all year! http://i1196.photobucket.com/albums/aa417/jalapenuts/Mobile%20Uploads/2015-01/AB3B8672-0BC5-4A89-99BE-52FFCEC957EC.jpg http://i1196.photobucket.com/albums/aa417/jalapenuts/Mobile%20Uploads/2015-01/3A2FFBB5-A40B-40F4-A25F-00416...

Whats your sequence for running your plumbing? I imagine you want to pump the cooler fluid out of the rad and into the head. Are you running a thermostat to control the pump on/off? What direction through the rad? Your bike is the s***

How's the build going?

How's your tuning? What temps are you seeing?

That pipe looks different than mine G9

Not sure but around 81 I think. The wheel is different spline than the one speed also.

I bought this two speeder engine off MA and fit it on a one speed donor. It was rough but it cleaned up good enough to run with a questionable treats wizard kit, Proma and 21. Second gear kicks in too early.

This is my stockish express

Here's what's I did today. I still can't ride my bike without pulling over to let it cool down below 400.

I have felt that same thing happen before too. I seized after WOT trying to see how fast I could go. I was on my Gilera Runner with a 172cc two stroke engine. Somewhere around 75mph it seized and that stopped the belt from turning which stops the tire from turning because the clutch is engaged. Even...

Sweet I cant wait. I need to switch to water cooler. I can't even ride my stroker for very long before it's over 400.

I'm going to borrow a friends 32mm mikuni and see how that does. It's a flange mount so I'll have to make it fit.

I started out with a 26mm dellorto and CT intake. I wanted to see what that would do before switching to the big black intake and a 28mm dellorto. I also started with a .5 base gasket and .5 head gasket which gave me 1.3mm squish. Later I removed the head gasket hoping to push the heat out the exhau...