Honda Spree and Elite 50 Forums

im interested in seeing them. I really liked these scooter pics. thank you for sharing them. really cool!!

haven't seen one of those in socal.. does it pivot on back wheels like a gyro?.

with some minor modifications a tg lock will fit on the nn. i have that tg lock handle i bought from you on my nn. its just not plug and play. the tg handle mounts inboard while the nn bolt is outboard. if that makes sense

any variated af05e starter should work 86 aero. not 85, theyre different. and i think any vertical dio starters. i think i swapped an af18 onto an af05e. not sure about the af16 though. someone else might chime in

. The nature of the Gyro seems to be that I mostly drive it WOT everywhere I go. I think this is every gyro and spree owners thoughts. lol next to my stock express, theyre the slowest things I got! :smile: but the gyros are also 2 of my funnest scoots to ride. I think its gotta be a carbon build up...

d*** Mike. shes a beaut. it has the petcock knob/lever. do you have the little flat cover that bolts above muffler? only other possibility as to the high muffler temps could it be carbon filled? if blocked with carbon it would retain the heat and holding the exhaust in would do the same? mine had 30...

I wish I could compare notes. but mine didn't have an engine cover when I got it. I bought a honda joy tb08 cover and mounted it on my 84. all mounting points matched up where the cover mounted. I made some spacers to mount the 235/30-10 tires on it. I think I only have the back spacers still on it ...

im so jealous. you got a gyro up motor . I like the looks of the 84-86 nn and tg better but you hands down have the better drivetrain. vertical cylinder, power to both rear wheels, a variator, 4 bolt intake, bigger ports, and bigger stroke, plus actual aftermarket parts. compaired to the us engine, ...

you need restriction on carb inlet so carb will draw fuel through the jets. I have a 21 oko on my 84ab07 bbk. go get a spray can lid, cut it down middle. mor like 60/40. take the 40% sized piece and set on carb inlet at the top. then put a hose clamp to secure it or slide you pod filter over it and ...

the 84 aero 50 has a variated AB07 engine, the crank bearings are (2)6004. the variator shaft has a 15mm diameter.stock variator boss has a 15mm ID and a 22mm OD. you can run any of the 20mm V. boss OD performance variator with a modified 50cc gy6 boss. drill the V boss ID from 14mm to 15mm. opens u...

here you go fleabay to the rescue!!! lolhttps://www.ebay.com/itm/Honda-NB50-Aero-Vision ... xy63FS4-wU

inside the splitter connection/tube, theres a little "puck" that the single cable from throttle goes through the center and has a nub or ball that keeps it from pulling through the puck. the cables to the carb and oil pump go into the other side of splitter tube and the ends slide into the...

im installing the 48.5mm pinasco vision cylinder on my orange 84 today and pull the polini. I spent all evening last night trying to decide which cylinder should go where. im like a kid xmas morning trying to figure out which toy to play with first., lol ill report back in a couple days.

heres more pics of the new cylinders

well I got a package from Italy today... the zetas are nice. the zeta lead/af01 looks like a real beast. I run these cylinders on my ab07. the vision cylinderhas 6 transfers and a big boost port also. but not as big as the lead cylinder. theyre 46mm the pinasco is nice qualitybut not as nice of a fi...