Honda Spree and Elite 50 Forums

Dude, the track has been closed for 5 yrs. i run 11.43 1/4 mi. pro street

cops don't inspect scooters they write tickets for infractions the dmv does inspections!

the pimps would not let me pics of their meat so backed off

never port a malossi or polini bore unless you think you are better than they are, look at the flow chart that comes with the bore, these companes directly compete against each other and polini has larger piston ports!

i ran my stock elite-s at 53mph for 26,000 mi. with the correct derestrictions and 9 to 1 gears, everything else was bone stock!

I have a 44.4 mini which is the largest built by qwik-fix, i believe he shaved the piston skirts to clear the crank which is how you make a contessa into a corsa, its a true 76cc.

you have the parts, put it together and if it blows i will tell you why

There is an old school way to figure out a gear ratio, all it takes is one finger the 8:44:1 ratio is useless, there is alot you can learn from me but i will kick back and watch the mistakes you make, a 125cc air cooled engine? dream on

you can still get a hi-speed front pulley and an 19mm delororto carb with an intake adaptor that i can still get, you can get 45mph on the flats but don't push it.

Pull the trans cover off and check the weights, ramp guides,belt,center spring, clutch springs, if the engine runs then one of these things in the trans will stop it from accelerating, yamaha mineralli based engines suck compared to honda

The stock honda clutch is the best, the hotter it gets the more it grabs, my 107cc aero bites so hard i need to have wheelie bars made, for minerelli engines i find koso bites best and when it fades the rollers have flat spots.

I agree with myspree but he knows i own the "ultimate aero" with every Japan option known, don't copy my carbon fiber seat!

TOURIST TRAP PICS I CAN START OFF WITH HOT PROSTITUES THAT WILL SHOW EVERYTHING ON MY SCOOTS, THE TOURISTS TAKE PICS OF MY SCOOTS ALL THE TIME HA! HA!

Thats a stock spree= a joke

with the stock gears and a bore kit - it will blow a stock derestricted engine needs 9 to1 ratio=53mph, with a dio rear pulley conversion maybe 59mph, so far know one has done it, i have it on my 107cc stroker