Honda Spree and Elite 50 Forums

Thank you, I received/researched tons of information from this site so I thought I would share the build. So I went to start it tonight with the stock exhaust and air box on. I noticed after a couple of kicks it was leaking fuel from the carb. I pulled the fuel line off and noticed the petcock isn't...

Waiting on a new air filter element, should be here soon. Once I install in air cleaner it will be time to test and tun with the rear panels off. Once I have it running well I would like in research other options for carb/filter combo to run stock panels with minimal trimming. Side stand mounted htt...

Got her fired up tonight with no exhaust or air cleaner, she ran for a good 10 seconds and I rev'd her up twice am she quit (flooded out). I will focus on tuning once I have an exhaust and filter. https://beta-static.photobucket.com/images/v87/ntonar/s1/306cb1ab-ab8e-4285-9a02-f00062a7b3e3-original....

What exhaust you gonna run? Any other mods planned? Note: you may need to move the shock to #4 hole to get more clearance. Them Spree plastics sit low and typically will smack the exhaust on the slightest road bump. The air filter is another tiny hurdle with the slim Spree panels. That is a good no...

Small update, finished the wiring, shock mount and cleaned the carburetor. Side stand has been ordered and waiting on an exhaust. Stock harness vs AF16 http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/IMG_5479.jpg Finished up http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/IMG_548...

Double shock mount welded, just waiting on two M10 bolts for the engine mount and shock. http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/image3.jpeg http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/image1%201.jpeg http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/image2.jp...

What side stand could I buy for $60? Do you have a link?

I just started an Af16 swap into one of my Spree's so I thought I would share the process. Getting started http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/IMG_5346.jpg http://img.photobucket.com/albums/v87/ntonar/AF16%20Spree/IMG_5349.jpg Motor out http://img.photobucket.com/albums/v87/nto...

I could model one up and share the file.

I can fill in the logo black if that helps, also I have a DXF file for cutting.

FYI I can make any logo if I have a high resolution straight on photo.

I made this using a CAD system and had them cut.

Where did you find all the sticker/decals? They look really good!

Wow what a great build! What do you do for a living?