Honda Spree and Elite 50 Forums

* yeah! That's sweeeet

Thanks beejay! That worked! As soon as the temp was over 100 it showed on the display.

Doesn't work

Why isn't my vapor telling my temp? I have a working sensor on the plug. I have it set to F. I have reset it and even read the instructions. i have two vapors and I can't get either one to work so it's probably something I'm doing wrong. The lead works on my mini temp display but doesn't on the vapor?

I don't think so

I let my bike idle for 15 min today and it max around 337 with old last year 50:1 saber. I drained the tanks and ran the bowl dry then filled with 110 32:1 saber for five min and was around 20 degree lower. I tried taking it for a ride but it started raining so...

The carb should not wiggle. If you can pull it off with one hand there is a problem. Sometimes the hose clamps you get with intakes are weak and strip out easy. If it is skipping gears it's broken, take it off and throw it away. Go to the hardware store and buy a couple new stainless steel ones. It ...

I bought some 110 today, I'll test it this weekend to see how it helps with my high temps. Probably adjust my vario

Have fun out there dude. I hope you find what your looking for.

Boring

Regular gas
I need to do something if I want WOT for more than 10 seconds
Lower compression
Maybe find a cdi box with a curve
Water cooled head

I installed some 8.44 gears this weekend and got to ride to the beach with DirtyE. The temps are manageable around 330 while putting down the road but they shoot up quick after a short burst. My jetting is on the rich side with a little bogging before acceleration.

She's got some nice curves

If you want to keep your primary as high as possible you will want to plug your oil pump area as much as possible. It's a huge area that the plug does not fill. The exposed case bolt holes deffinetly doesn't help so you want to make that up some where else.

I used copper washers and hondabond on mine. I tested the cases with air pressure and they hold. viewtopic.php?f=16&t=30818