Honda Spree and Elite 50 Forums

The carburetor is new and acts the same exact as the stock one which I cleaned two times so I donÔÇÖt think itÔÇÖs clogging anywhere in there (I made sure the emulsifier tube was clean on the stock too). Otherwise the exhaust and intake filter are checked and fine. But my question is, what would be...

Fuel starvation, it will normally go to top speed immediately, then stumble down. You're describing a lean carb at 3/4 to WOT. You need to check the condition of the main jet and emulsifier tube. I'm betting one or both are partially clogged, or main jet's not correct for the application. Other thi...

Ive had a petcock go bad in couple different ways. No flow, constant flow and the ever frustrating (and toughest to diagnose) intermittent flow. Ive never had restricted or partial flow but its not impossible. A dirty fuel filter would create the situation you describe..also a gummed up (or kinked/...

Thanks for the motivation I need it lol but I forgot to mention the previous owner did buy a new air filter but I might try my high flow air filter that I donÔÇÖt use for my elite and maybe try to tune that. I also checked the exhaust which the previous owner bought ÔÇ£newÔÇØ or in other words new t...

I recently acquired a Suzuki FA50 in decent shape and not running. Got it running within five minutes of getting it home. The problem is that it doesnÔÇÖt go past 18 mph. It will not rev high and stumbles between 3/4 and full throttle. Full throttle makes the revs actually lower from 3/4 throttle. I...

Got it, thanks for the explanation good thing IÔÇÖm on here.

For what reason?

And btw yes I did have a 78 jet in it which IÔÇÖm thinking needs to be raised because of that air filter.

ItÔÇÖs derestricted, I put an aftermarket air filter on so I currently need to rejet because itÔÇÖs running lean so IÔÇÖm waiting for a bunch of jets to come. The Keli variator is on itÔÇÖs way too which I decided on just for the sake of cost over the others.

I donÔÇÖt know if your carburetor has a fuel air mixture screw because that would be characteristic of a pinned down screw but if not idk.

Haha nice, IÔÇÖm interested to see the pictures of what you did with the carb

Jeez sounds like a bad day. I would assume the stock muffler must be fairly damaged so I would go with an option other than fixing that.

I know IÔÇÖve been posting a little too much but this will likely be the last one lol. I have seen options for a Keli variator and Polini variator, I was wondering what the best variator would be for me to get for my moped (cost-effective options are definitely welcome). I am going 36 and barely tou...

Hey, I was wondering about the Keli variator. So, I just need to buy that drive face and use the stock ramp? Also, does anybody know where I could get a splitter cable for my moped because itÔÇÖs a Honda Elite SA50p so it only came with the throttle cable for gas and I had to zip tie the oil open. T...

So, just put that Keli variator piece in place of the stock and tune the rollers then I will have a speed improvement?