Honda Spree and Elite 50 Forums

check the bystarter (electric choke) If you only have a cold start problem. But give the carb a good cleaning, theres a good tutorial in the wiki on carb cleaning, even a picture guide if needed.

main page for the wiki index http://hondaspree.net/wiki/index.php5?title=Main_Page service manual link http://hondaspree.net/wiki/index.php5?title=Service_Manuals choose your scooter year and download the manual that fits. nice carb cleaning detail: http://hondaspree.net/wiki/index.php5?title=Carbur...

The manual has one way of testing and this is another: copied from the wiki Now that it is complete, push it back on the carb, screw on the clamp, and try it out! One way to test it before you install it on the bike; hold the yellow lead on the positive terminal and the green lead on the negative te...

Even with the low miles you should check the belt measurements. 15mm width or less it should be replaced, also with the age check for cracks and burn spots. Check the rollers for flat spots, and make sure there is no grease in the variator.

Hello. welcome to the forum. The Sa50pr sticker under the seat is the color code. Look on the frame under the left side of the scoot for the serial and model number. probably just an sa50p. the spigot on the carb is just a vent. The sa50p should be capable of 30 mph in stock form. When you derestric...

i used the 48in extension with my elite. to much wire but works great.

A little light reading for you. http://www.hondaspree.net/other/Spree_NQ50_84-87_1.pdf very nice looking spree. chapter 3 has carb adjustments for the idle dont own a spree so not sure how zippy they are on take off, I hear there a little slow but you might check the drive belt against the specs in ...

download this manual. http://www.hondaspree.net/Aero80_NH80_Manual.pdf It will help to identify parts and give procedures for most things you will need to do. Also use this for help with all sorts of things. http://hondaspree.net/wiki/index.php5?title=Main_Page

check the drive belt and rollers. Make sure to remove any grease in the variator, it is not needed and makes the rollers harder to roll. even though it only has a few thousand miles it has plenty of years to make the belt slip or degrade.

while having the float needle out also do this just in case. http://hondaspree.net/wiki/index.php5?t ... Valve_Seat

stock weights are 8.5 if I remember correctly. sock top speed of a stock one should be around 40 according to http://www.motorscooterguide.net/Honda/ ... eSA50.html.

are they used on larger motors? Or is it just something to add $$ to the price of the carb? they also use these carbs on 4 stroke motors too and other 2stroke motors that can use the power jet because how the motor flows. for ours its way easier to tune without it. and yes less money to spend on pa...

Had a similar hole in an exhaust on my scoot the first block. I believe that's the reason I'm on bbk number 2.

use and follow these http://hondaspree.net/wiki/index.php5?t ... r_Cleaning and this http://hondaspree.net/wiki/index.php5?t ... ture_Guide lot's of people need to do this 2-3 times.

I think welding would be the only sure way. might try a muffler wrap but if it works it wont work for long.