Honda Spree and Elite 50 Forums

It is a V8 muffler which I sell, NParks was lucky and got the last one.

As I mentioned in the other thread go get the moped it is clean and looks like it is in great shape, those mopeds are hard to find here in that condition.

Yup, that is a SA50P so go get it!

I've seen things happen like this a ton of times and usually the moped doesn't suffer to much so you should be fine. A good idea when removing the restrictions is to put a larger jet inside the carb as well as tie open the oil injector especially if you modded the air box cover to allow more air (I ...

It depends on how long you let it sit, the proper working fuel petcock will only allow fuel to pass it when the moped is running, vacuum open the valve to allow fuel to pass it. This will be an issue if you don't ride it more then once a week or so but if you ride it every day and this happens perha...

I don't mean to sound rude or anything but you really need to work on how you present a question to the forum. So far the 2 posts I've just read that you posted have left me wonder "what?". Post more detail like type of moped and what exactly is happening so everyone has a better idea of t...

What color? Also if the bike is site-unseen then look at the transmission cover if you can see it in a picture look to see if it is 2 pieces, if it is a single piece it is a LX/SR model and not one with the performance type of motor. The color schemes were '94-'96 (I think) red or black '97-'99 yell...

[quote=Cubey]Keoni wrote: I've heard horror stories of months to not wanting to order the parts because it is for a moped. This is why I take in the part numbers on a piece of paper and hand it to them rather than asking for a __________ for a 1984 Honda Spree. My local Honda dealer seems half decen...

[quote=Scooterspal]My idle speed is usually relatively low but constant with no stall out. Lately, when I come to a stop it will drop off and then start to slowly speed back up to the point I need to almost hold back or she will take off. You can feel her trying to move forward. Any suggestions on w...

The throttle cable can be pulled on to cause the carb to be in a opened position which will make some bikes hard to start I'd take the panels off and see if you can get some slack out of the cable by checking the way it is routed so you can still leave it on the stand, which is the safe way of doing...

Just change the spark plug regardless if it is still sparking, spark can be weak and still seem like it is a good enough spark. Normally if it runs with starter fluid but doesn't without it I would assume that the cylinder isn't getting gas but lets assume it is, I'd check the valves to see if they ...

The carb clean is good advice but also change your spark plug and clean your electrical contacts for the coil just to be safe.

As far as I know that is a normal thing for the Spree to do being the electrical system is a so-so. Another alternative would be the turn signal bulb wattage is a little to high and is using a little more power then it should be so make sure you have the correct watt bulb.

All things considering that isn't too bad, I've heard horror stories of months to not wanting to order the parts because it is for a moped. As far as some other places besides Honda I've had a customer who ordered a Benelli moped and waited over a year after paying in full for his $3000+ moped and n...

I'm in the middle of working on it right now and I have some of our guys taking pictures of parts right now so hopefully it will go up next week but the catalog will be a work in progress since I have to add all the information into our database that our hosting provider over charges for, I mean com...