Search found 660 matches

by dun rite
Tue Oct 29, 2013 9:45 pm
Forum: Technical Help
Topic: SO frustrated!!
Replies: 12
Views: 6951

Re: SO frustrated!!

apparently you can borrow a comp. tester from most auto parts stores with a refundable deposit. the width of the drive belt according to the manual is 11.5mm 0.45in service limit listed at 10.5mm 0.41 in. also if your belt is original even if it's within spec it could still be slipping due to glazed...
by dun rite
Tue Oct 29, 2013 12:23 am
Forum: Technical Help
Topic: SO frustrated!!
Replies: 12
Views: 6951

Re: SO frustrated!!

Don't own a spree but don't think they have rollers. Probably needs a new belt, (check against specs in the manual) really needs the airfilter and assy correctly installed nice and tight. intact, also the muffler , really needs the back pressure and turbulence. Running without either of those is a d...
by dun rite
Sat Oct 26, 2013 1:04 pm
Forum: Technical Help
Topic: Please help right now I'm flip in out
Replies: 31
Views: 9627

Re: Please help right now I'm flip in out

will probably run with 90 psi, but should be closer to 120 psi. when doing the comp test, hold the throttle wide open or remove the carb.
by dun rite
Fri Oct 25, 2013 11:43 pm
Forum: Technical Help
Topic: Please help right now I'm flip in out
Replies: 31
Views: 9627

Re: Please help right now I'm flip in out

Is this the same scooter as your other post? If so I would imagine a soft seize due to the panty hose air filter allowing way to much air. You should really have a temp gauge so you can keep an eye on the temps while riding. Look at the plug and see what color it is. Probably shouldn't ride again un...
by dun rite
Tue Sep 24, 2013 10:34 pm
Forum: Technical Help
Topic: 1992 SA50P Sudden no start
Replies: 9
Views: 3983

Re: 1992 SA50P Sudden no start

I use these guy's but several other's exist Bidebandit.com cheapcycle.com to name a few.

view this http://www.collegebikeshop.com/fiche_se ... veh=131284
by dun rite
Thu Sep 19, 2013 9:57 pm
Forum: Technical Help
Topic: got a second scooter and its running rough.
Replies: 14
Views: 4292

Re: got a second scooter and its running rough.

Dingus Khan wrote:I put new plug in ran it for 2 days and checked. what is a plug chop?

read through this http://hondaspree.net/wiki/index.php5?t ... Plug_Chops
by dun rite
Wed Sep 18, 2013 11:03 pm
Forum: Technical Help
Topic: Elite 50 HELP
Replies: 21
Views: 7911

Re: Elite 50 HELP

Maybe check your muffler or exhaust port for partial restriction. It's a long shot but who knows.
by dun rite
Tue Sep 17, 2013 11:01 pm
Forum: Technical Help
Topic: Elite 50 HELP
Replies: 21
Views: 7911

Re: Elite 50 HELP

have you tried running it without the gas cap, to rule out plugged venting in the tank. If it can't draw air it won't allow fuel flow.
by dun rite
Sun Sep 15, 2013 11:20 pm
Forum: Performance Technical
Topic: 87 honda aero 50 (nb50) voltage problems. please help
Replies: 2
Views: 1864

Re: 87 honda aero 50 (nb50) voltage problems. please help

download your service manual here. http://hondaspree.net/wiki/index.php5?t ... ce_Manuals

this will have test procedures and expected results.. probably will become your new best friend
by dun rite
Sun Sep 15, 2013 10:25 pm
Forum: Technical Help
Topic: Split Cases
Replies: 10
Views: 2858

Re: Split Cases

you could always buy the tusk tool, use it, then list in on ebay or here on the forum. trouble is once you resell it you will probably find yourself needing it again in the future. I have never regretted buying I could use at least once. good luck on which ever method you choose.
by dun rite
Mon Sep 09, 2013 12:20 am
Forum: Technical Help
Topic: My Aero50 Wont start
Replies: 23
Views: 13012

Re: My Aero50 Wont start

one style of homemade tester viewtopic.php?f=3&t=20006


the thread also explains the process.
by dun rite
Sun Sep 08, 2013 7:55 am
Forum: Technical Help
Topic: My Aero50 Wont start
Replies: 23
Views: 13012

Re: My Aero50 Wont start

do a leak down test to rule out bad gaskets or seals, even though they are new. and or take the cyl and piston out and have them checked for proper size. are both piston rings the same? and are they installed in the correct orientation? If it matters I dont know, just a few thoughts
by dun rite
Thu Aug 29, 2013 5:50 pm
Forum: Technical Help
Topic: 2000 Elite S or 1999 Elite SR
Replies: 13
Views: 4836

Re: 2000 Elite S or 1999 Elite SR

buy them both?
by dun rite
Wed Aug 28, 2013 7:18 pm
Forum: Performance Technical
Topic: battery isnt charging and electrics wont work.
Replies: 5
Views: 2758

Re: battery isnt charging and electrics wont work.

it was the problem on my ch150.