Email Steve at VTCycles, I just bought two keli's from him and he might still have some left. I think he's out of oko's right now. Personally, I'd rather have the keli. Better quality IMO.
Good luck!
Search found 1558 matches
- Thu May 17, 2012 7:46 am
- Forum: Technical Help
- Topic: keli vs. oko
- Replies: 3
- Views: 1215
- Wed May 16, 2012 9:55 pm
- Forum: General Discussion
- Topic: trail tech vapor
- Replies: 25
- Views: 14582
Re: trail tech vapor
You could also try reading the detailed instructions. I think it says 5 wraps is all you need on the coil wire. Too many messes up the reading. It is adjustable but I remember 5 wraps.
Congratulations on your Vapor, you will be pleased to have one!
Congratulations on your Vapor, you will be pleased to have one!
- Tue May 15, 2012 8:19 pm
- Forum: Technical Help
- Topic: I'm going crazy. Losing spark when hitting bumps/pitch diffs
- Replies: 65
- Views: 17306
Re: I'm going crazy. Losing spark when hitting bumps/pitch d
Put the new coil on, same problems. What's next? Currently running 52 pilot 125 main. Air screw half way out... Am I just grounding out somewhere really trying to remain calm with this issue. Float set to 18/19mm per oko spec, running stock float bowl again. Ideas? Change ignition switch. If that d...
- Tue May 15, 2012 8:38 am
- Forum: General Discussion
- Topic: VIEW ACTIVE TOPICS
- Replies: 7
- Views: 3995
Re: VIEW ACTIVE TOPICS
Thanks motormike, I also like the "Top" feature in the bottom Left corner of each box, which returns you to the top of the page in the post! And allows you to access the "view active topics" faster.
- Sun May 13, 2012 12:22 pm
- Forum: Technical Help
- Topic: Bystarter Clamp
- Replies: 5
- Views: 1859
Re: Bystarter Clamp
Any one know where I can get a new bystarter clamp for 1985 Honda vision with a Keihin carb. Mine has broken during removel. Maybe you could find one here: http://www.cmsnl.com/honda-ne50_model1215/ This is for a ne50 vision. Good luck to you. I have shipped parts from here (Netherlands) to the Uni...
- Sun May 13, 2012 12:08 pm
- Forum: Scooter Showcase
- Topic: 1986 spree build in progress
- Replies: 2
- Views: 2581
Re: 1986 spree build in progress
what the think under your seat the you have your gas line with inline filter hooked up too?? Looks like a vacuum diaphragm fuel pump and he's using a ball valve petcock. It also looks like the vacuum spigot on the intake has been blocked or removed, perhaps a better location exists on the syms' blo...
- Wed May 09, 2012 7:21 pm
- Forum: Performance Technical
- Topic: 50mm taiwan bore info
- Replies: 60
- Views: 19996
Re: 50mm taiwan bore info
Evilone, you mean .002 two thousandths.evilone wrote: 2. piston to cylinder clearance was .02" (not too bad).
- Wed May 09, 2012 7:18 pm
- Forum: Performance Technical
- Topic: 50mm taiwan bore info
- Replies: 60
- Views: 19996
Re: 50mm taiwan bore info
As confirmed by Darin, The Tiawan bores lack a considerable ammount of QC. In fact the piston that I had in my Tiwaneese bore was much bigger at the skirt than at the dome. I believe that if I had run the bore withought checking this beforehand, I wold have soft seized under normal running conditio...
- Thu May 03, 2012 7:06 pm
- Forum: General Chit-Chat
- Topic: Anyone bought from this company in Japan?
- Replies: 5
- Views: 2555
Re: Anyone bought from this company in Japan?
They are good in my book. I've ordered from them a couple of times, once I received wrong parts because of incorrect description and they paid to ship it back and refunded the money promptly. Shipping is pricey from Japan, so beware. Not sure about the side stands for our scooters, maybe email them ...
- Wed May 02, 2012 12:47 am
- Forum: General Discussion
- Topic: OKO 24mm Carb Question
- Replies: 37
- Views: 13771
Re: OKO 24mm Carb Question
Greetings: Several folks here have posted about trouble getting the PowerJet OKO 24 to work right. The power-jet inserts are hard to find, nobody knows where to get something other than the #15 that seems to come in the carb. Found these if you care to have a go at it. I think this store is in flor...
- Tue May 01, 2012 8:53 am
- Forum: General Discussion
- Topic: trail tech vapor
- Replies: 25
- Views: 14582
Re: trail tech vapor
This is what traffic jamz did, I just coppied it somewhat. Its magnet is just sitting on the lip of the rim with out any glue and it is working just fine, amazingly! Yes, yamaha blaster kit. :thumbwink: http://i1136.photobucket.com/albums/n500/dynamohum/Photo461-1.jpg Here is another, better pic... ...
- Thu Apr 26, 2012 9:14 pm
- Forum: Technical Help
- Topic: AF05E Big Bore Kit - What size jet?
- Replies: 14
- Views: 7354
Re: AF05E Big Bore Kit - What size jet?
the Sa50 plug does fit the af05 just fine. treats also sells honda jets now too, but not in the handy pack that daywot sells. https://www.treatland.tv/OEM-honda-keihin-carburetor-jet-p/oem-keihin-main-jet.htm Just to make you guys aware, those are not the stock honda jets for the pa style carbureto...
- Thu Apr 26, 2012 12:58 am
- Forum: General Discussion
- Topic: Flash 3.26 Revisited
- Replies: 15
- Views: 4229
Re: Flash 3.26 Revisited
Don't be like kingearwig ....
He go "booom"!
He go "booom"!
- Mon Apr 23, 2012 12:48 am
- Forum: General Discussion
- Topic: Exaust P#O%R#N!
- Replies: 28
- Views: 7107
Re: Exaust P#O%R#N!
http://page4.auctions.yahoo.co.jp/jp/auction/d130132907Mystic wrote:What no link to the Daytona?
- Sun Apr 22, 2012 11:34 pm
- Forum: Technical Help
- Topic: All my rebuilt and my toys for this year!!!!
- Replies: 169
- Views: 48096
Re: Need a quick help For my friends Honda Elite .
Man, those look great! Yea, there's alot to be said for that paint. It's the hot ticket!
You did a real nice job. Keep posting the results for us on the rest of it.
You did a real nice job. Keep posting the results for us on the rest of it.