Honda Spree and Elite 50 Forums

Guys, dont you have recommendation for big bore kit please. I would go for the Contessa with that pipe. Otherwise its Corsa all the way but the Technigas will hold you back. Link below and use promo code “kittens” for 15% off until 11/30. https://www.treatland.tv/SearchResults.asp?Search=Corsa With...

I know dropping the mj 10 to start with sounds crazy but the cp carbs like smaller mj’s than the pwk’s.

Start fishing, as I call it. Unscrew the mixture screw 3 full turns and drop the main jet by 10 and see if it gets super crisp and zingy. Dont ride it this way, its only for tuning while on the stand to find the ballpark. Once you get those crisp snappy throttle blips (mega-lean), the rpm’s will han...

I picked up a basket case Spree for quick flip that had no carb. Instead of investing in an oem, I optd for a chinese ebay carb for about $22. For starters, the mounting flange to the intake was not flat. So bad that the o-ring would not seal so I needed to slather it with Hondabond. Next, the slide...

What all will I need to rebuild the OEM? Can I just clean the carb and jets or do I need to replace all gaskets etc.. https://www.ebay.com/itm/361929010182?hash=item5444a66c06:g:aTUAAOSwSlBYyWQ9&amdata=enc%3AAQAIAAAA4P7YummCk5Q24J9W4wgBkBlsE0Gu8rnDQchx9SIIKxZA%2BewnW1lLGyRBYl0QFCtdloVZ7GGs0cpiV...

Ditch the new carb and rebuild the OEM one. Most replacement carbs that “fit spree” are absolute junk. The airbox gasket might be a small contributor since the box is designed/engineered to flow a certain cfm. My spree ran like garbage with some tiny holes drilled in the lid from a previous owner. R...

I remember Kevin710 swapped a bunch of scooters to full LED. Blinkers, brakelights, headlight, etc…and there was a special resistor? Capacitor? Doo-hicky? That had to be used. Something that if not used would cause the LED’s to flash. He had a whole box of them and gave me a few I never used. He sai...

Last one I bought was from Webike but its been so many years ago I dont remember which JDM bike it was from to fit the Spree. Sorry I cant be more help.

Are you sure that isnt a stroker bore?

I typically run 3x5g and 3x5.5g with the ZX and Polini for Ruck vari. Takes off like a slingshot. Tough to keep the front wheel down. Good for around town, urban assault. Another scoot has all 6.5g with 8:1 gears. No neck snapping take-offs but tops out close to 70mph around 11k rpms. Back country r...

Aside from the wiring gremlins…does that say 17.5mm carb and Arrow on a stock bore? Thats like $400 in parts for nothing more than tuning issues and a cool sound. Get the Corsa, man.

Now that its jetted, trans tuning is next. Contra, ZX, clutch springs, rollers, variator shims, etc…

Tru72 is in Hawaii. Those guys get all sorts of crazy things nobody can find. Last I heard he’s still building motors but I dont think he’s been on this forum for a long time.

4L-BS is the correct battery. Cheap $20 ebay deal. Any ah will work.

Theres 247 different things it could be. Did you put gas in it?