Honda Spree and Elite 50 Forums

thanks wheelman. I'm going to try it and post some photos.

I finally order a new 24mm carb. I hope this fix my bog down problem. I will post a pic when it get in.

I just wanted to put bigger brakes on my spree forks. I think with a thinner tire elite wheel may work? your saying I have to make it fit. I can drill the forks for the axle. as for the fork bosses that was the question? and, I was not sure which wheel with bigger brakes will fit the spree forks? I'...

hi forum. The finish build is on page 3.

This is what I'm looking to do. have a spree front end forks, elite 94& up front wheel, and front brakes hub form a metro. for Bigger Brakes on the spree. thanks.

these guys are the best. they helped me with my first swap. they know what they are doing. I couldn't contain myself I did a small 5' foot burn out in breaking period. you have your motor running that's great. once it's all done, nothing but fun. everyone spends money on these builds. I lost track a...

NEW COMBO for the warmer weather: (changes in red) time to upgrade trans Using 28mm OKO carb: Pilot = 55 Main = 142 Needle = clip in middle A/F = ~1.75turns out Trans: Lathe lightened Keli with NEW 4.8g KOSO Rollers x6 for 28.8g total NEW 2k Clutch Center spring NEW 2k Jog style grab springs in sto...

Latest tune update , Wed March 04, 2009 Using 28mm OKO carb : Pilot = 55 Main = 142 Needle = 1clip rich from middle A/F = ~1.5turns out Trans (same settings as before): Lathe lightened Keli with 5.3g Malossi x6 for 32g total 2k Clutch Center spring 2k Jog style grab springs in stock clutch Malossi ...

nice pic. sweet spree

I like that spree. it will fit in my car.

Very nice build. I like that used look. you cant paint that used look. lol.
all you have to get is a weed trimmer gas tank and use that for oil or gas. zip tie it to the frame.
take the filter out and use a in line screen filter. nice work.

I changed the carb with another stock one. and it's still bogging at take off. looks like I will need a bigger carb or one with changeable pilot jets.

hi, who makes the temperature gauge? or sell what brand? thanks.

I told you its lean on the pilot jet .What you wont is a jap dio stock carb the have a changeable piot jet and main jet .Ive got two spare but shippng kills the price oh ok. I didn't know they made a stock carb with changeable pilot jet. I need a small carb to save gas. let me see if I can fine one...

got some yellow LED driving lights also put two at the back.
you have to use extra 3M tape. to get them to stick on.

Bogging is a lean condition. Idle jet's not adjustable, and you've changed the main jet. Any of you guys ever try changing out the venturi tube? This is the tube under the main jet. It controls the mix at 1/4 to 3/4 throttle. Suspect that it's lean for what you're doing. Perhaps get a spare and dri...