Honda Spree and Elite 50 Forums

Trafficjamz wrote:Spikes of over 400 after letting off WOT are normal

Heat spikes of over 425 After letting off WOT need a bigger pilot jet

Are you running ruima bores that hot?

Pulled the engine tonight after getting a 90 psi compression reading. The studs were loose... :surprise: The cylinder walls look fine, head appears ok, piston had just a bunch of carbon buildup I have cleaned everything up and reinstalled the top end, going to do a bench compression test next. (Anyb...

evilone wrote:I'm with mystic. I was thinking 138 main. As long as you're under 400 degrees you should be good

evil, wanna take a trip to chicago and buy this thing off me? haha - I'll cut ya a sick deal

Thanks - that's what Traffic was saying on the main jet - I'm getting mixed advice on safe temp ranges on this board - some say " I run mine at 425 all day" others say 350 is literally the danger zone. I know these cast Ruima bores aren't bullet proof - is there a temp I should be really s...

oh and when Traffic built my engine it was right at 130 PSI on the bench - with the help of a few base gaskets

Hey guys - if you have followed my other threads you know whats going on but if not I finally got my moped running with a new Keihin Carb (PWK 28mm) My setup is - 52mm Ruima BBK, PG Typhoon (V8) pipe, Pop Pully, Keli Clutch, 28mm Keihin PWK, port matched by Traffic, 1000 rpm center, polini triple sp...

Gratuitous pic

Trafficjamz wrote:treatland has the rebuild kit for cheap.

saw that, was thinking about just chucking the OKO in the lake

Problem solved! Garbage oko carb... I am having a small issue , the new Keihin float drain keeps * fuel and the screw is all the way tightened... Might just cap it off OMG finally! wanna sell the oko 26 for cheap :smile: No sh1t. What a headache. Might just keep the oko, think it just needs a float...

Problem solved! Garbage oko carb...

I am having a small issue , the new Keihin float drain keeps * fuel and the screw is all the way tightened... Might just cap it off

carb came today - ill put it on after work - legit Keihin!

Trafficjamz wrote:you ever change the carb?

Still hasn't come from Thailand. Ebay woes...

an update for anyone who cares: Took it around the block with the new CDI... Bike dies, spark cap hanging down off frame... *!? Turns out, when suspension is fully loaded over bumps/etc the spark / spark cap was hitting the front most part of the rear fender plastic. Cut all that plastic out (where ...

welcome to the typhoon club

Trafficjamz wrote:

Chicago Ben wrote:Well guys just told traffic I pulled the trigger on a 28mm Keihin pwk. Coming from Taiwan, should be here in about 9 years. I'll check back then.

is it from autotech355?

It is some oddball seller Bazsogaborus? 100% feedback...