Search found 1210 matches
- Thu Sep 07, 2017 1:33 pm
- Forum: Builder's workshop
- Topic: 01 Elite SR "GOOCH"
- Replies: 534
- Views: 249156
Re: 01 Elite SR "GOOCH"
my ride last night : went to start my bike and it wouldnt start so start looking at things and notice that I only had 3 bolts holding my intake on and every single bolt on the intake was loose. at this point I shoulda just called it. but no I decide to deal with this and get going. spent some time a...
- Sat Sep 02, 2017 11:05 am
- Forum: Builder's workshop
- Topic: Flash 9: Sanity Restored
- Replies: 109
- Views: 96003
Re: Flash 9: Sanity Restored
d*** glad you and yours are safe.
- Thu Aug 31, 2017 12:10 am
- Forum: Technical Help
- Topic: 2001 elite top speed issues
- Replies: 11
- Views: 7037
Re: 2001 elite top speed issues
Couple things Is the pipe new? If not it's possible it got bent by previous owner. Scooter swap shop sell better gaskets that are a lot better in my opinion and they are cheap. I don't recommend running the exhaust like you are. Need to fix the bolt problem on the head for sure. If you put on a pod ...
- Wed Aug 30, 2017 6:33 pm
- Forum: Technical Help
- Topic: 2001 elite top speed issues
- Replies: 11
- Views: 7037
Re: 2001 elite top speed issues
welcome is it the s or sr? you might need to change jets(up jet as your now letting more air in than stock) since you put on the pod filter. if you cant rejet Id suggest trying to find a stock air box and filter(for sale section). so your exhaust is only running one bolt where it attaches to the hea...
- Sun Aug 20, 2017 2:51 pm
- Forum: Performance Technical
- Topic: Spree Dio swap
- Replies: 11
- Views: 8912
Re: Spree Dio swap
Why don't you ask in the for sale section for a motor? I personally just bought 2 from forum members and know there are a few more for sale if your looking. I wouldn't pay more than $250-300 shipped for a complete af16
- Sat Jul 29, 2017 6:19 pm
- Forum: General Discussion
- Topic: 01 front suspension
- Replies: 6
- Views: 5630
Re: 01 front suspension
Thanks wheel I'll do some checking.
- Sat Jul 29, 2017 5:35 pm
- Forum: General Discussion
- Topic: 01 front suspension
- Replies: 6
- Views: 5630
01 front suspension
Hey guys anyone know of good replacement shocks for and 01 elite front end. Mine is in need. Hit a metal plate Friday and d*** near went down with wobble. Noticed it was getting looser recently 12k on the front end is a good run. Was hoping to go disk but finances has pushed that back. Thanks guys
- Wed Jul 26, 2017 2:49 pm
- Forum: Technical Help
- Topic: Needle comparison help
- Replies: 2
- Views: 2915
Re: Needle comparison help
Not sure if looking at them will be much help. Unless it's an completely different needle. I ran into an issue a while ago now and actually had many different needles side by side that I knew were with 100% certainty were different and visually was hard to tell. Even tried measuring and sizing them ...
- Tue Jul 18, 2017 8:05 pm
- Forum: General Discussion
- Topic: 1994 Honda elite s speed questions and ideas
- Replies: 6
- Views: 5237
Re: 1994 Honda elite s speed questions and ideas
Gearing is the first thing I did to mine.
- Mon Jul 17, 2017 6:19 pm
- Forum: Performance Technical
- Topic: 1995 Honda Elite
- Replies: 10
- Views: 8202
Re: 1995 Honda Elite
variator + gears then carb + clutch then bbk + pipe
those were my steps
those were my steps
- Mon Jun 26, 2017 6:14 pm
- Forum: Performance Technical
- Topic: Is My Carb Too Big?
- Replies: 7
- Views: 7290
Re: Is My Carb Too Big?
I am currently running a 26 on my corsa set up and I think its to big. I have run a 24 on mine with great success and will be going back to that set up very soon. even with a great port job from oneman I know guys that are only running 26 on theirs. I am struggling with jetting mine currently runnin...
- Mon Jun 19, 2017 12:40 pm
- Forum: Scooter Showcase
- Topic: Honda Aero nb50 to nh125 Swap Project
- Replies: 178
- Views: 151564
Re: Honda Aero nb50 to nh125 Swap Project
Looks great
- Mon May 22, 2017 6:58 pm
- Forum: Builder's workshop
- Topic: 01 Elite SR "GOOCH"
- Replies: 534
- Views: 249156
Re: 01 Elite SR "GOOCH"
I actually got the carb used from him. Was right after my old carb took a dump. Figured I'd give it a go. It might be to big but the 24 was probably good figured I'd had nothing to lose and I needed to get her back on the road so I could get home.
- Mon May 22, 2017 5:10 pm
- Forum: Builder's workshop
- Topic: 01 Elite SR "GOOCH"
- Replies: 534
- Views: 249156
Re: 01 Elite SR "GOOCH"
yeah Im currently running a 26mm up from a 24mm polini carb on a corsa kit now. this bigger carb has been much harder to diagnose.
its close its just crazy how much bigger on the jetting I am having to go.
its close its just crazy how much bigger on the jetting I am having to go.
- Mon May 22, 2017 1:20 pm
- Forum: Builder's workshop
- Topic: 01 Elite SR "GOOCH"
- Replies: 534
- Views: 249156
Re: 01 Elite SR "GOOCH"
had the girl out last night. put about 50 miles on her. I have been attempting to to tune in the new 26mm carb and its getting the better of me. I currently running 120mj with the clip all the way down. pretty much as rich as I can make it right now with what I have.. it is still having issues at WO...