Honda Spree and Elite 50 Forums

71cuda wrote:looking for a stock muffler for for 94 to 01 Honda elite 50 in good shape ?

Sorry no.

PM Sent..

I doubt the seal is the culprit. Likely a flow issue, see if it runs that good tomorrow when it has cooled down. I have never had a gas cap problem and have repaired lots of Bikes.

Did you clean the emulsion tube under the jet?

Sounds good swim, just have to get the roller weight right for the SP3 to hit just right.

I have some spare harnesses that are cut up Swimming, if you need something let me know.

Dr_Craw wrote:cool thanks guys, so the fuel level sensor wont get damaged?

Just really be careful with the acid. It will burn the skin and the vapor is very harmful. Wear a mask, hold your breath while you do it. Dont leave the acid in longer than a minute you can burn right thru the tank and flush with water.

Ok, take a crapload of epsom salt, pour it in the tank. then fill with water. Then take a battery charger 10-20a, clip the neg to a clean bare metal spot on the tank, take the positive and kook it to a steel rod, or a copper wire. Don't let the leads come in contact with eachother. I did this and k...

Pipe is plugged. Take it off and burn it. Blow it out and paint with BBQ paint.

Good work!

Needle has "76P" stamped on it. Also, I have a new petcock to install. It was cheap so, just to remove it from the equation. Vacuum line has been replaced, and new clamps on it. The barb appears clear and clean on the intake side. One thing I would like to do before I put the carb body ba...

Burl_GT wrote:Anybody know where I can get a needle without buying A whole rebuild kit?

Im sure I have one.

Check vacum hose to petcock and bystarter

Several potential issues here. Have you read the manual? Without details on things like was it running? What is the condition of spark plug filter petcock exhaust? More detail prehaps one of us can help.

Pineapplegti wrote:I see no moped... I only see a scooter.

50cc small and not a motorcycle = moped to a noob. You know what he meant.