Honda Spree and Elite 50 Forums

When the key is turned "on" and bike is NOT yet running: Rear brake light will be constantly on and will get brighter when either brake is applied. Turn signals will work and blink. Horn will work. The headlight ONLY turns on when the bike is running. So, if you don't have a key for your b...

No idea if they come with O-ring. I would assume NOT. Any ring the same size would work, it doesn't need to be "Honda". Just be sure its thick enough to protrude past the profile of the spacer when placed in the groove. Ive learned over the years that not all O-rings are created equal. Dia...

http://www.ebay.com/itm/Honda-NQ50-SA50 ... 3l&vxp=mtr

Better jump on this one...newly listed

I buy my hose from the local Auto Parts store. They have bulk rolls of all different sizes and I got 16" of each size and it came to like $5, Key: like Jakob said. Get a blank from Honda dealership and have it cut anywhere using original key as a guide. But the new keys wont have the cool origi...

If I ever lay her down, the Spree is the last thing Im worried about taking damage. Couple hundo and buy another.

I have an 87' rack if you need one. That way it wont have the turn signals built into it like the 84-86''s do.

oops

Have you checked to see if you have spark? How about if you have fuel flowing when vacuum is applied to vac line? If the spark plug's integrity is even in question it should be replaced with a new one. They are only like $3-$4 and can be bought anywhere. Cleaning the carb is not only a task that ope...

Explain to me again how youll change the pilot jet in the stock Spree carb? Heres the answer to a Spree oil plug. You have to use washers to hold it down. The old oil pump mounting bolt can hold the washers. In my area, I could only find these in stock at Advance Auto Parts. I tried O'reilly's and N...

I give it a week and Gary will be asking how to make it go faster...

At least now it doesn't look goofy next to the 87'.

Now that she rolls it would be the time to check things like tire pressure, brake adjustments, etc...

Be sure the mixture screw is set per the manual...I think its 1 1/2 turns out. Idle screw is set by ear where she purrs nicely. Wear a helmet and watch for traffic!

50ccMax wrote:

Meatball wrote:Wherabouts on the left coast are you?

Im in Oceanside(North San Diego County)

That's a bit too far from Seattle for a house call.

It really wasn't a planned thing. Just did it on a whim. Sounds like your rack is a great candidate for this mod !