HONDA AERO 80

MySpree · Post by **MySpree** » Sat Sep 17, 2005 3:26 pm

WELLLLLLLLLLLLLLL I HAVE A CHANCE TO GET A HONDA AERO 80!!!! AND IM TAKEING IT. THE AERO 80 IS 100$ IT RUNS SMOOTLY GOES 45-50, I HAD IT GOING ABOUT 48-49 CUZ IM SO LITE AND I HAD A LITTLE BIT OF A HILL BUT ON FLAT LAND AN EASY 46. OK WELL I WENT TO MY SCOOT.COM AND I LOOKED AT THE SITE AND LOOKED AT THE AERO 80 SETION AND THERE ARE ACTUALLY HP PARTS U CAN GET FOR IT!! NOT REALLY MADE FOR IT BUT YEA IT WORKS. E MAILED A GUY AND HE SAID HE WAS ABLE TO GO 80 MPH WITH A COUPLE MODS. DARAT YOU BETTER WHACH UR SELF, ILL BE THE ONE TO BEAT!!

MySpree · Post by **MySpree** » Sat Sep 17, 2005 6:58 pm

http://www3.telus.net/dougsimpson/aero80.html

burnt_toast · Post by **burnt_toast** » Sun Sep 18, 2005 12:15 am

I think if darat gets a pipe, and some other goodies he'll take you.

Nontheless, thats a nice scoot, looks like it has some potential.

Justinsane · Post by **Justinsane** » Sun Sep 18, 2005 3:22 am

2 fast 2 furious!!

mopedman · Post by **mopedman** » Wed Sep 21, 2005 6:30 am

i don't know about that dsrst csn beat 100cc like there nothing

MySpree · Post by **MySpree** » Wed Sep 21, 2005 3:54 pm

darat? and i can put a high speed pully kit on, i am getting the double reed kit, and the 24 mm cab, and the k&n filter with a velocity stack. im gonna get i emaild the guy and he sayd he found a cyclinder that will fit with no mods and will make me gos alot faster and im gonn get the pipe. and o yea the carbon fiber reeds.

burnt_toast · Post by **burnt_toast** » Wed Sep 21, 2005 5:42 pm

mopedman wrote:i don't know about that dsrst csn beat 100cc like there nothing

werd. i can take my friends 125cc xtreme, and this small 80cc dirtbike.

and that was back when i was stock.

(too bad im not talking about the spree..)

MySpree · Post by **MySpree** » Wed Sep 21, 2005 5:49 pm

so i mean maby darat can beat me. but i mean all he has a a high speed pully kit and a 63cc cylinder off vtcycles. and then he is most likely getting a pipe. i on the other hand am getting a dual reed kit with carbon fiber reeds and a 24mm carb to start me of. then im getting the high speed pully kit, and then the exoust. at that point im gonna get a new cylinder head i think it was a 125cc not sure someware up there. and im gonna put my blaster on it. o and my own little home touch streamers on the hande bars and a carb in the spokes... 3 spokes so it sound cool vroooooom!