Project Tempest UNVEILED Act1 (Drag Spree build)
Moderator: Moderator
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
Thanks for the replies everyone!
noise, cafe seat is cool idea but will tame the look imo, I want this beast to look wild! hahaha and my friend actually came up with a good idea for a custom gas tank that I'm going to look into, post up more laters.
yup I always wondered what I "could" do with a spree too, and seeing some tasty drag setups along with Projectcar mag's latest Honda build really inspired me to go all out
and just for wheelz, see attached
noise, cafe seat is cool idea but will tame the look imo, I want this beast to look wild! hahaha and my friend actually came up with a good idea for a custom gas tank that I'm going to look into, post up more laters.
yup I always wondered what I "could" do with a spree too, and seeing some tasty drag setups along with Projectcar mag's latest Honda build really inspired me to go all out
and just for wheelz, see attached
- Attachments
-
- DSC04513.JPG (150.31 KiB) Viewed 5434 times
-
- DSC04511.JPG (144.33 KiB) Viewed 5439 times
-
- DSC04509.JPG (145.6 KiB) Viewed 5435 times
projects galore
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
Greetings:
Thanks, BT! Now there's a scooter that'd be easy to carry upstairs for work in the Boudoir! It even has that convenient ergonomic carrying handle. I hope you have a really, really good lock!
Thanks, BT! Now there's a scooter that'd be easy to carry upstairs for work in the Boudoir! It even has that convenient ergonomic carrying handle. I hope you have a really, really good lock!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
That's true, you could just throw it over your shoulder and run up the stairs.
I'll bet that even with the Dio motor, it doesn't weigh much over 100#. The Spree motors are amazingly light; the Dio is probably a 10-15# increase.
I'll bet that even with the Dio motor, it doesn't weigh much over 100#. The Spree motors are amazingly light; the Dio is probably a 10-15# increase.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
bump for one unique project
here's some dio spree ideas for you mookie
here's some dio spree ideas for you mookie
projects galore
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
Hey Yan what size bore are you using?If your going to drag race that bike you should look into putting a steering damper so you don't get the head shakes because of the riding posture you will be at.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
noted. not nearly yet ready for dragstrip so focusing on other things as of now, hope to hit the strip around christmas timebakaracer wrote:Hey Yan what size bore are you using?If your going to drag race that bike you should look into putting a steering damper so you don't get the head shakes because of the riding posture you will be at.
motor is from my red Elite, ministroked polini corsa. but may go with another setup down the line, keeping options open.
projects galore
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
why change perfection???burnt_toast wrote: ministroked polini corsa. but may go with another setup down the line, keeping options open.
fast? reliable? (expensive) if you decide to ditch the setup, i call dibs on your broken-in corsa
it may not be the absolute limit of the engine, but it'll run for a long time. and i'm pretty sure it'll go faster than a spree (especially with stock brakes) should go.
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
oh ya misunderstood my friend, i totally LOOOVEE my ministroked corsaSpreetard wrote:why change perfection???burnt_toast wrote: ministroked polini corsa. but may go with another setup down the line, keeping options open.
fast? reliable? (expensive) if you decide to ditch the setup, i call dibs on your broken-in corsa
it may not be the absolute limit of the engine, but it'll run for a long time. and i'm pretty sure it'll go faster than a spree (especially with stock brakes) should go.
and because of that, the corsa motor is now back at home occupying my red cherry elite which finally saw some riding time today (drag spree sits in garage staring at me scary like )
as far as the drag bike, I'll work on figuring out engine mount fix and aesthetics for comfort then decide on motor options, may donate the corsa again or build up one dedicated for track. it'll be toss up based on money and time, i've got a few shelf goods up my sleeve due date for ACT 2 is set for some time in December, stay tuned
projects galore
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
You got that stroker motor thats in your arnada.get that thing going and put that in.If your going to drag that bike might as well go all out.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
trust me.. ample power as she sits, well NO power actually since no motor now hahabakaracer wrote:You got that stroker motor thats in your arnada.get that thing going and put that in.If your going to drag that bike might as well go all out.
stroker in time if I feel like it, doesn't seem necessary now and I have other builds atm
projects galore
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
projects galore
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Project Tempest UNVEILED Act1 (Drag Spree build)
Anyone want to continue this build? She's up for sale, check it out:
viewtopic.php?f=2&t=17404
cheers,
yan b.
viewtopic.php?f=2&t=17404
cheers,
yan b.
projects galore