K&N filter
Moderator: Moderator
K&N filter
anybody have the link to the k&n air filter that fits the spree??? i kno its on here somwhere but i cant find it anywhere or does any body kno the diameter of the carb intake
Wanna kno how to keep an idiot busy for hours look below
Wanna kno how to keep an idiot busy for hours look above
Wanna kno how to keep an idiot busy for hours look above
- MYSTERE1
- Goped
- Posts: 84
- Joined: Mon Jul 23, 1973 10:24 am
- Location: Edmonton, Alberta, Canada.
- Contact:
Start with a #75 and go up or down from there. I started off with a #70, then i moved up 400 meters in elevation and had to go to a #75, then i did the intake mod and had to re jet to a #80. I live at 680 meters above sea level. things may be different where you live.
Mystere
1985 Honda Spree.
Front pully mod, 1" longer belt,
gutted pipe, K&N air filter, #80 main jet,
Intake mod, Leo Vince clutch springs,
40 MPH top speed.
1985 Honda Spree.
Front pully mod, 1" longer belt,
gutted pipe, K&N air filter, #80 main jet,
Intake mod, Leo Vince clutch springs,
40 MPH top speed.
well i figured i would start with an 80 but when i went to honda i brought my stock jet they couldn't find that type of jet anywhere so now im thinkn on buyng a different80 size jet and making my stock one the same size........ good idea or not?????????
Wanna kno how to keep an idiot busy for hours look below
Wanna kno how to keep an idiot busy for hours look above
Wanna kno how to keep an idiot busy for hours look above
- MYSTERE1
- Goped
- Posts: 84
- Joined: Mon Jul 23, 1973 10:24 am
- Location: Edmonton, Alberta, Canada.
- Contact:
I can't believe you dealership couldn't find you a main jet but found you those clutch springs. thats kinda funny
there was a guy on ebay awhile back that had jet kits for the spree. maybe you could try and find him. actually i think there might be a link to him somewhere in this site if you look hard enough.
IMO if your going to try and enlarge it your self you will need this information:
http://www.hondaspree.net/modules.php?n ... opic&t=881
I would start small and work your way up in size. you may find a #80 is too big.
there was a guy on ebay awhile back that had jet kits for the spree. maybe you could try and find him. actually i think there might be a link to him somewhere in this site if you look hard enough.
IMO if your going to try and enlarge it your self you will need this information:
http://www.hondaspree.net/modules.php?n ... opic&t=881
I would start small and work your way up in size. you may find a #80 is too big.
Mystere
1985 Honda Spree.
Front pully mod, 1" longer belt,
gutted pipe, K&N air filter, #80 main jet,
Intake mod, Leo Vince clutch springs,
40 MPH top speed.
1985 Honda Spree.
Front pully mod, 1" longer belt,
gutted pipe, K&N air filter, #80 main jet,
Intake mod, Leo Vince clutch springs,
40 MPH top speed.