Checkin in, first post... here at least

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Checkin in, first post... here at least

Post by toad772 »

Chicago Ben wrote: I hear that, just when you live in downtown Chicago there aren't too many Honda motorcycle dealers close by...
No Honda dealers near me but the closest one brought my parts to a gas station in town for free.
Image
PS3 it only does everything.
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Bear45-70 wrote:
Chicago Ben wrote:I hear that, just when you live in downtown Chicago there aren't too many Honda motorcycle dealers close by...
Try 42 miles to the nearest Honda dealer and the next is 48 miles. I don't think your distance is an issue.
Rather just have parts shipped to me, way easier
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

motormike wrote:Those Pirelli SL 26's are excellent tire for the money......also Shinko has been performing top-notch on the front of my Gyro track bike considering they cost about $22 a piece......the guys I race with swear that Dunlop tt92's are the sh**.....they cost BIG $$......I'm not a fan of Cheng Shin or Kenda.......... :imo:
Bikebandit had the Pirellis for $23 for a tire... I don't know how I can go wrong with this haha
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9685
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Checkin in, first post... here at least

Post by Bear45-70 »

Chicago Ben wrote:
Bear45-70 wrote:
Chicago Ben wrote:I hear that, just when you live in downtown Chicago there aren't too many Honda motorcycle dealers close by...
Try 42 miles to the nearest Honda dealer and the next is 48 miles. I don't think your distance is an issue.
Rather just have parts shipped to me, way easier
The don't b**** about shipping cost. If you are lazy you have to pay for it.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
eliteguy50
CBR1000RR
CBR1000RR
Posts: 4219
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: Checkin in, first post... here at least

Post by eliteguy50 »

Bear45-70 wrote:The don't b**** about shipping cost. If you are lazy you have to pay for it.
I have some things shipped just because it is cheaper than driving.
motormike wrote:Errands become adventures.
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Bear45-70 wrote:The don't b**** about shipping cost. If you are lazy you have to pay for it.
Haha, thanks Bear for laying down a set of rules for me on this forum. I don't think you will see me * about shipping costs ever. I will gladly pay $10 so I don't have to drive around in Chicago's * traffic
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

The engine is together!

I ported the intake side of the block too :2thumbs:
Image

I used two thicker base gaskets so your compression would not be so high. :wink:
Image

Only thing left is the gears need to be installed.

Everything went together very smooth today :thumbwink:
Last edited by Trafficjamz on Wed Jun 01, 2011 7:45 pm, edited 1 time in total.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Trafficjamz wrote:The engine is together!

I ported the intake side of the block too :2thumbs:
I used two thicker base gaskets so your compression would not be so high. :wink:

Only thing left is the gears need to be installed.

Everything went together very smooth today :thumbwink:
nice dude I appreciate it. Did you check to see if that return label made it with everything ?
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

I don't seem to have the brake lever :confused: I hope you have that part.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Trafficjamz wrote:I don't seem to have the brake lever :confused: I hope you have that part.
Yeah I removed every rear brake component

:thumbwink:
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

Is it possible that you sent me a kick start piece from a spree? :confused:
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
SpreeMadness520
Elite
Elite
Posts: 773
Joined: Sat Mar 12, 2011 2:21 pm
Location: Hart Michigan

Re: Checkin in, first post... here at least

Post by SpreeMadness520 »

Lmfao
130cc Stroker
1984 Porsche 944
1965 Vespa
Chicago Ben
Elite
Elite
Posts: 507
Joined: Fri Jun 11, 2010 6:52 pm
Location: North Bay, CA

Re: Checkin in, first post... here at least

Post by Chicago Ben »

Trafficjamz wrote:Is it possible that you sent me a kick start piece from a spree? :confused:
Yeah, you want it?
Image
1995 SA50P
pop pulley
50mm Ruima
8.44:1 gears
PG Typhoon
1500k spring
1000k Polini triples
M Keli clutch
28mm Keihin PWK
OKO Polished intake
uni filter
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

Chicago Ben wrote:
Trafficjamz wrote:Is it possible that you sent me a kick start piece from a spree? :confused:
Yeah, you want it?

No.......It took me forever to realize that it was the wrong piece. :x

Your kicker was messed up...but it works good now :thumbwink:

I also noticed that the threads on your final drive gear were chewed up, so I fixed those thread for you.

It is all together now and I have only these pieces left :smile:
Image
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Checkin in, first post... here at least

Post by Trafficjamz »

Done (and spider proof):smile:
Image
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Post Reply