Carb Screws Size

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

Post Reply
User avatar
mr pibbs
Veteran OG
Veteran OG
Posts: 608
Joined: Sat Jun 20, 2009 10:22 pm
Location: Tampa, FL

Carb Screws Size

Post by mr pibbs »

I am in need of some of the screws in the bowl of the carb. Are they metric #8 or #6?
1993 Elite - The Mad Max
User avatar
mustangwagz
Elite
Elite
Posts: 483
Joined: Sun Mar 21, 2010 9:10 pm
Location: Western, PA

Re: Carb Screws Size

Post by mustangwagz »

WEllllll...for what bike?

i know on the spree they're 4 x 12 screws. fine thread..possibly a machine screw on that note since they're philips screws. typically fine threaded screws with phillips or flat head slot are machine screws... Hardware store oughta carry em bud. take your carb with ya to make sure.

also, get yourself some lock washers to go on..they'll be microscopic washers, but well worth gettin em.
-Zac :coolcruise:

1981 HD-Ironhead Sporty. 1000cc, 4 speed, drag pipes, and drag bars.. (chic/cop magnet)
72 Rupp Roadster 2 (aka. RUMP ROASTER!!)
05 vinson
78 bronco (Log skiddin Hog!!)
User avatar
mr pibbs
Veteran OG
Veteran OG
Posts: 608
Joined: Sat Jun 20, 2009 10:22 pm
Location: Tampa, FL

Re: Carb Screws Size

Post by mr pibbs »

I believe Keihin carbs all use the same bowl screws. These are for a CH150.
1993 Elite - The Mad Max
eliteguy50
CBR1000RR
CBR1000RR
Posts: 4219
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: Carb Screws Size

Post by eliteguy50 »

mr pibbs wrote:I believe Keihin carbs all use the same bowl screws. These are for a CH150.
Yup, 4mm screws
motormike wrote:Errands become adventures.
Post Reply