Page 50 of 60
Re: Does anyone else own a Honda NS 50?
Posted: Thu Dec 01, 2016 4:08 pm
by MrJumps
Should run crisp with the larger intake. Small bores like air. Sometimes its not about size but how the ports are setup. Did 1man do the port work?
Re: Does anyone else own a Honda NS 50?
Posted: Thu Dec 01, 2016 4:15 pm
by motormike
Very few take the time and effort to deliver a concourse-level machine at the final flag,
but you have certainly indicated that there are no stops on this build. Swell job, but ride it or die...mm... 
Re: Does anyone else own a Honda NS 50?
Posted: Thu Dec 01, 2016 7:28 pm
by spiro
MrJumps wrote:Should run crisp with the larger intake. Small bores like air. Sometimes its not about size but how the ports are setup. Did 1man do the port work?
i had the porting done by a local specialist in southern California. he specializes in track racing bikes. the company is Boyko Racing and he is in Costa Mesa, CA. i take all of my cylinder and valves to these guys. doesnt matter if it is 4 stroke or 2 stroke they will always make the bike run better
Re: Does anyone else own a Honda NS 50?
Posted: Thu Dec 01, 2016 7:31 pm
by spiro
This is the V-Force Reed setup all laid out with the gaskets and hardware and then put together. CR80 intake with a brand new seal
- IMG_4990.JPG (185.83 KiB) Viewed 11051 times
sexy time!
- IMG_4995.JPG (90.91 KiB) Viewed 11051 times
Re: Does anyone else own a Honda NS 50?
Posted: Thu Dec 01, 2016 8:20 pm
by MrJumps
Thats killer, I am enjoying this. I have another 25 days till I get my corsa and intake and stuff.
Re: Does anyone else own a Honda NS 50?
Posted: Fri Dec 02, 2016 12:27 pm
by spiro
This is the top end all put together with the intake and the PE24 carb in place. i am running a 35 pilot and a 90 main for the jetting. thats what i use on my 46cc goped so i am hoping its close. im hooking up the radiator tonight and installing the carb cable so i will have some cool pictures coming up. i bought these really cool aftermarket racing radiator tubes online that are blue, i think they will give the cooling system a good look. Im also running an intake tube to the carb with a UNI filter. i find that having some length to the carb from the air filter really helps with tuning especially on 2-stroke. putting a pod filter directly on to the carb gives it a sputtering mid range on all my old projects.
- IMG_5002.JPG (97.79 KiB) Viewed 11040 times
more to come!
Re: Does anyone else own a Honda NS 50?
Posted: Fri Dec 02, 2016 1:13 pm
by MrJumps
Looks factory and from your photos looks studio. Good work so far keep it up oh and get me pictures of the spiderman! Haha
When you first start it can we get a video??? Pretty please!!!
Re: Does anyone else own a Honda NS 50?
Posted: Fri Dec 02, 2016 1:27 pm
by spiro
MrJumps wrote:Looks factory and from your photos looks studio. Good work so far keep it up oh and get me pictures of the spiderman! Haha
When you first start it can we get a video??? Pretty please!!!
yeah of course. im actually pretty close. i need to hook up the radiator, finish wiring in the headlight, add fluids and give it a kick. i will have to adjust jetting i am sure but im excited to be close. ill probably have it going by next weekend. thanks for the compliments
Re: Does anyone else own a Honda NS 50?
Posted: Sat Dec 03, 2016 3:44 pm
by tomjontomtom
spiro wrote:This is the V-Force Reed setup all laid out with the gaskets and hardware and then put together. CR80 intake with a brand new seal
i dont even want to post pics of my rebuild after seeing yours!
so what model# vforce is that?
do us a favor when you get to wiring, lots of pics and diagrams ?
Re: Does anyone else own a Honda NS 50?
Posted: Sun Dec 04, 2016 4:55 pm
by tomjontomtom
so I'm having a hard time locating a plate for blocking off the oil pump
anyone have a source?
Re: Does anyone else own a Honda NS 50?
Posted: Sun Dec 04, 2016 6:00 pm
by motormike
tomjontomtom wrote:so I'm having a hard time locating a plate for blocking off the oil pump
anyone have a source?
Current poster "spiro" says he is using a "plug" that he ordered from "Web!ke"
Japanese site...very well known...good luck.
Re: Does anyone else own a Honda NS 50?
Posted: Sun Dec 04, 2016 6:27 pm
by tomjontomtom
motormike wrote:tomjontomtom wrote:so I'm having a hard time locating a plate for blocking off the oil pump
anyone have a source?
Current poster "spiro" says he is using a "plug" that he ordered from "Web!ke"
Japanese site...very well known...good luck.
noticed that. unfortunately only finding a kickstand omition plate
Re: Does anyone else own a Honda NS 50?
Posted: Sun Dec 04, 2016 7:25 pm
by motormike
tomjontomtom wrote:motormike wrote:tomjontomtom wrote:so I'm having a hard time locating a plate for blocking off the oil pump
anyone have a source?
Current poster "spiro" says he is using a "plug" that he ordered from "Web!ke"
Japanese site...very well known...good luck.
noticed that. unfortunately only finding a kickstand omition plate
Try a pm to spiro...maybe there's a gimmick... 
Re: Does anyone else own a Honda NS 50?
Posted: Mon Dec 05, 2016 12:06 pm
by spiro
tomjontomtom wrote:so I'm having a hard time locating a plate for blocking off the oil pump
anyone have a source?
I order the Web!ke stuff off of their eBay page. even though it comes from Japan, it gets here fairly quick. less then a week. order a few things and they will cut the shipping price down also. it comes with two plugs but im not totally sure what the other plug goes to. ill figure it out eventually! but the smaller one plugs the oil pump hole.
http://www.ebay.com/itm/KITACO-Seal-Plu ... Sw9mFWM-dE
Re: Does anyone else own a Honda NS 50?
Posted: Tue Dec 06, 2016 12:46 pm
by spiro
So I got the radiator in place. I had to use the original radiator because its pretty difficult to find new ones and I am not aware of any radiator upgrades that easily fit into place. The radiator I have is in good shape actually, the black paint looks nice and the cap is in good shape. I ordered these radiator tubes on eBay and they fit in place nicely. They don't match the blue/green decal on the gas tank but I still think it looks better than the stock black hose.
- IMG_5290.JPG (86.96 KiB) Viewed 11001 times
the second photo is the radiator hose with the exhaust on also. I did a titanium wrap over a black high heat powder coat.
- IMG_5292.JPG (92.96 KiB) Viewed 11001 times