CH80 Elite Transmission Flush

[Frank_1175]

The manual calls for two bolts, the inspection/Fill and the drain.

I don't seem to be able to get any tool to fit that bolt, I can't even reach it.

Is it required to take apart the tranny cover?

Thanks!

[Atis]

It is tight but I manage to get a thin walled 1/4 drive socket in there, if need be grind down the socket sides a bit extra, good luck.

[Frank_1175]

I got it out, it is a tight fit. I used my regular socket and the good old hammer.

Thanks,