Project 83 NB 50 M

[martynkim]

Bought this on CL $40 a few weeks ago. I decided to make it a rider. Anyone that may have parts please PM.















Basically, I need cosmetic parts. I have side panels the glovebox door is broken though.

It runs, need an airbox I have the rest of the mechanical parts.

I have a new set of wheels coming one is bent and the other is a little rusty.

Pretty much the airbox and the side panel with good door. oh, and I need to get a key made.

[mopro logan]

that looks like it will be really cool restored. very nice buy good find in my book.

[maxreverb]

killer score!

[martynkim]

I also have this very cool front glove box from a Tact that I will add to it.

[mousewheels]

Gee '99 tabs! She's been waiting you for a few years

Front end looks like the '84 NN50 Gyro, except your fender is cast in light brown (ABS?) plastic, and the NN50 is in polyethylene. Brake is on the right side just like the NN50.

[richdavison34]

First gen Aeros are AWESOME!

[Bear45-70]

Marty, the 1983 and '84 Aero 50 used a 12 mm carb while the Spree and '85 Aero and up used a 14mm carb. May be a speed secret to swap on one of the other bigger carbs.

[bradthreee]

Ive got the side cover you need, but unfortunately the tabs for the door are broken and no side lock. I got a good front fender too. I have the ignition and key, but it'll be cheaper to get a key made. Also got some other stuff too.

[bradthreee]

Going to the dealer tomorrow, want me to get a key cut for you?

[martynkim]

Thanks anyway B3 I'm sure I can have one made here easily.

[martynkim]

Marty, the 1983 and '84 Aero 50 used a 12 mm carb while the Spree and '85 Aero and up used a 14mm carb. May be a speed secret to swap on one of the other bigger carbs.

Thanks for the tip. I might have to go manual on the bystarter though. That gets me thinking about different reeds and intake too.