how much speed could a stock spree handle

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

User avatar
niftyman
Spree
Spree
Posts: 293
Joined: Fri Jul 22, 2011 1:27 am
Location: Christchurch,NZ

Re: how much speed could a stock spree handle

Post by niftyman »

From what ive read you will never get a spree motor up to 65mpgh a turbo wont do it nos wont do it neither will either the gearing in a spree wont allow it as swimingfree wrote the motor would hav to rev to at least 20000rpm then the crank would snap or the piston will leave the motor like a bullet leaving a gun

65mph could be done with a motor swap or by riding off a the side of a mountin
DJ1

NEK MINNIT

Malossi
DJ1 54mph
dio gear swap in progress
living in chch NZ
earthquake central
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

like I said, I am adding a power source which will be 99% visually undectable. There will be no turbo/supercharger/nitrous. All stock gearing on the spree motor and not pushing it beyond a safe limit.....think outside the box
flat350
Noob
Noob
Posts: 6
Joined: Sun Aug 28, 2011 4:34 pm
Location: Schaumburg,Il

Re: how much speed could a stock spree handle

Post by flat350 »

Steam catapult?It would get up to 65 for a short distance,and not be visable after launch.A back up electric motor?
1987 NQ50 Spree all stock,1986 CH80 Elite,lots of experience a few years back with highly modified RD series 2 strokes
User avatar
niftyman
Spree
Spree
Posts: 293
Joined: Fri Jul 22, 2011 1:27 am
Location: Christchurch,NZ

Re: how much speed could a stock spree handle

Post by niftyman »

I know now you gonna sit on the bike while its on the back of a truck going down the highway
DJ1

NEK MINNIT

Malossi
DJ1 54mph
dio gear swap in progress
living in chch NZ
earthquake central
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

bottle rockets that wood work till thay went boom

Steam catapult yes from 0 to 65 in 10 feet and from clean under were to full in 5 feet
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
PimpinSpree
Elite
Elite
Posts: 722
Joined: Thu Apr 19, 2007 6:40 pm
Location: oregon coast

Re: how much speed could a stock spree handle

Post by PimpinSpree »

A tow rope?
User avatar
SuprasNsprees
Elite
Elite
Posts: 564
Joined: Mon Jun 20, 2011 2:05 pm
Location: saint louis
Contact:

Re: how much speed could a stock spree handle

Post by SuprasNsprees »

TROLLing motor
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

a woman in a red shirt :crazy:
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
wiguy05
Elite
Elite
Posts: 568
Joined: Sat Aug 09, 2008 8:48 pm
Location: Janesville, WI

Re: how much speed could a stock spree handle

Post by wiguy05 »

B-Nasty wrote:like I said, I am adding a power source which will be 99% visually undectable. There will be no turbo/supercharger/nitrous. All stock gearing on the spree motor and not pushing it beyond a safe limit.....think outside the box
Your claims are BS.

Your "power adder" on a Spree yielding 65mph is BS.

Your thread is BS.

You as a person are probably BS as well.


:lock:
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust

2006 Xkeleton Trickster
- Lifan 90cc auto
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

i hate to say it

we no
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
jeep2003
Noob
Noob
Posts: 6
Joined: Mon Sep 05, 2011 7:25 pm
Location: Vestal ny

Re: how much speed could a stock spree handle

Post by jeep2003 »

Hes going to put a Kph guage on it and replace the face with a mph one :thumbsup:
eliteguy50
CBR1000RR
CBR1000RR
Posts: 4219
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: how much speed could a stock spree handle

Post by eliteguy50 »

I would worry more about the tires than the motor at 65mph. Even if the motor blows and the brakes give out, you still have a chance to walk away. If the tires blow at 65mph, you have the chance to be a vegetable.
motormike wrote:Errands become adventures.
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: how much speed could a stock spree handle

Post by Trafficjamz »

B nasty............. B trollin'
Image
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

I am going to blow yalls minds. build thread should start in a week or two after i get all the parts
User avatar
Mystic
CB900F
CB900F
Posts: 2584
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: how much speed could a stock spree handle

Post by Mystic »

Just dont get yourself killed, burned up, or turned itnto a vegetable over no Spree lol good luck I like proving people wrong but not at the expense of my own wellbeing :D
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Locked