how much speed could a stock spree handle

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

how much speed could a stock spree handle

Post by B-Nasty »

hypothetically speaking. Just how much speed can the tires and frame handle before somthing breaks or it gets wobbly?? I have an idea for my scooter but want to be sure it can handle the speed
PimpinSpree
Elite
Elite
Posts: 722
Joined: Thu Apr 19, 2007 6:40 pm
Location: oregon coast

Re: how much speed could a stock spree handle

Post by PimpinSpree »

I get up to 50-55 and havnt died yet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

i think that depends on how long of a streak you want to leave on the road of your self ???
to do what ever you are thinking of the motor will need to be replace and welding will be invald if the weld brakes it over..
swimmingfree
Last edited by swimmingfree on Sat Sep 17, 2011 2:56 pm, edited 2 times in total.
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
SuprasNsprees
Elite
Elite
Posts: 564
Joined: Mon Jun 20, 2011 2:05 pm
Location: saint louis
Contact:

Re: how much speed could a stock spree handle

Post by SuprasNsprees »

it's stopping that's the hard part
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

swimmingfree wrote:i think that depends on how long of a streak you want to leave on the road of your self ???
to do what ever you are thinking of the motor will need to be replace and welding we be invald if the weld brake it over..
swimmingfree
I would be leaving the stock motor and not cutting the frame at all.
hoping for 65mph

I know most will laugh at the above statement but I will be adding a power source
PimpinSpree
Elite
Elite
Posts: 722
Joined: Thu Apr 19, 2007 6:40 pm
Location: oregon coast

Re: how much speed could a stock spree handle

Post by PimpinSpree »

Somehow I still see that happening on the stock motor. Even with an added "power source" unless its a jet pack. But I don't think there are gears made that will even allow for that fast
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

you will see, it will be the ULTIMATE sleeper scooter :bowrofl:
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

all i have to say about a sock spree doing is i hope the Doctor can get the piston out of you sas with out hurting the piston .. if so ill buy it .. remember were your siting
swimmingfree
PS
take a hit of nos for your self before you hit the button
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

swimmingfree wrote:all i have to say about a sock spree doing is i hope the Doctor can get the piston out of you sas with out hurting the piston .. if so ill buy it .. remember were your siting
swimmingfree
PS
take a hit of nos for your self before you hit the button
no power adders either
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

spre don,t have variator so if you put one on its not stock im sure that some one here can finger what kinda of rpm you wood to do it.. i wood guess 15.00 to 20.000 .
i hope you can get there but i don't think you can
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
B-Nasty
BMX
BMX
Posts: 34
Joined: Thu Sep 15, 2011 11:30 pm
Location: texas

Re: how much speed could a stock spree handle

Post by B-Nasty »

swimmingfree wrote:spre don,t have variator so if you put one on its not stock im sure that some one here can finger what kinda of rpm you wood to do it.. i wood guess 15.00 to 20.000 .
i hope you can get there but i don't think you can
swimmingfree
using all stock gearing too. Also my additional power source will be hidden. It will take a close inspection to find it.

total hp will be about 10 btw

I dont want to spoil the build thread so ill keep playing the guessing game with yall
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

so what kind of rpm do you think it will take???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
SuprasNsprees
Elite
Elite
Posts: 564
Joined: Mon Jun 20, 2011 2:05 pm
Location: saint louis
Contact:

Re: how much speed could a stock spree handle

Post by SuprasNsprees »

B-Nasty wrote: Also my additional power source will be hidden. It will take a close inspection to find it.

total hp will be about 10 btw

I dont want to spoil the build thread so ill keep playing the guessing game with yall

please tell me you're going to try to spray it .

I build big-boy cars :D you're not gonna hide power adders from me





this is gonna get good, i can feel it
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: how much speed could a stock spree handle

Post by swimmingfree »

well here what i think it a truck with a rope bolted to one side of the handle bar so you cant let go..
or its a air plan to throw it out of at 30,000 feet..

please vote now

swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9682
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: how much speed could a stock spree handle

Post by Bear45-70 »

swimmingfree wrote:i think that depends on how long of a streak you want to leave on the road of your self ???
to do what ever you are thinking of the motor will need to be replace and welding we be invald if the weld brake it over..
swimmingfree
Image
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Locked