2012 Moped Race Classes
Posted: Fri Nov 25, 2011 10:17 am
DRAG RACING classes for the 2012 season
limited to honda style motor for classes 100, 200, & 300: nq50, af05, af16, af18
All Classes - any use of demel or any handy tools used for smoothin, grindin, sanding, polishing of the intakes/block/exaust is acceptable
100 class: 50cc ONLY
250lbs weight minimum with rider
Pure stock 50cc ( factory bore and crank must be used)
2 stroke or 4 stroke
Any variator/rollers/springs combinations allowed
NO aftermarket cranks (stock elite S)
Any exhaust
Frame is "stock" and of unmodified material (engine extensions are allowed)
CT style manifolds are allowed
Carb limit to 28mm
Gear Combo limit to 9.8
No NOS
200 class: 51cc to 90cc ish
275lbs weight minimum with rider
Any "bolt on and go jug"
No polini/malossi jugs
Factory stock crank only!
Any variator/rollers/springs combinations allowed
CT style manifolds are allowed
Carb limit to 30mm
Any frame mods
No NOS
300 class: - 72cc to 95cc
300lbs weight minimum with rider
Any "bolt on and go jug"
Any carb & manifold
Any variator/rollers/springs combinations Allowed
Polini/Malossi jugs are allowed
Mini stroke cranks are allowed
Any frame mods
No NOS
400 class: - 100cc to 130cc
300lbs weight minimum with rider
Any non Honda engine is ok
Limited to "1" cylinder engine
Times will be separated with NOS/ No NOS
1/8 mile is the standard for posting times, if one makes a 1/4 mile run.. Since they are so few of them will be lumped in to there own catagory for now
Multiple mopeds per class is ok
These classes are a start, when makin a post, pleasse use this format
Forum Name - Class - Time - Dist - Date - Frame
when of if there is enough postings we will condense to a top 10 per class
Happy Racing !!
limited to honda style motor for classes 100, 200, & 300: nq50, af05, af16, af18
All Classes - any use of demel or any handy tools used for smoothin, grindin, sanding, polishing of the intakes/block/exaust is acceptable
100 class: 50cc ONLY
250lbs weight minimum with rider
Pure stock 50cc ( factory bore and crank must be used)
2 stroke or 4 stroke
Any variator/rollers/springs combinations allowed
NO aftermarket cranks (stock elite S)
Any exhaust
Frame is "stock" and of unmodified material (engine extensions are allowed)
CT style manifolds are allowed
Carb limit to 28mm
Gear Combo limit to 9.8
No NOS
200 class: 51cc to 90cc ish
275lbs weight minimum with rider
Any "bolt on and go jug"
No polini/malossi jugs
Factory stock crank only!
Any variator/rollers/springs combinations allowed
CT style manifolds are allowed
Carb limit to 30mm
Any frame mods
No NOS
300 class: - 72cc to 95cc
300lbs weight minimum with rider
Any "bolt on and go jug"
Any carb & manifold
Any variator/rollers/springs combinations Allowed
Polini/Malossi jugs are allowed
Mini stroke cranks are allowed
Any frame mods
No NOS
400 class: - 100cc to 130cc
300lbs weight minimum with rider
Any non Honda engine is ok
Limited to "1" cylinder engine
Times will be separated with NOS/ No NOS
1/8 mile is the standard for posting times, if one makes a 1/4 mile run.. Since they are so few of them will be lumped in to there own catagory for now
Multiple mopeds per class is ok
These classes are a start, when makin a post, pleasse use this format
Forum Name - Class - Time - Dist - Date - Frame
when of if there is enough postings we will condense to a top 10 per class
Happy Racing !!