the best bore kit
Moderator: Moderator
the best bore kit
Go ahead and post, don't even go by my old posts wcich i hope are gone
some people dream of speed, i own your dreams!
-
kryptonite
- Spree
- Posts: 125
- Joined: Sun Jun 20, 2010 12:26 pm
- Location: Hemlock, MI
Re: the best bore kit
umm can i say... mine 
... ok let me explain, its a 50mm tawain bore (82cc w stock crank) it maynot be the best bore but here is why i say this... it was my first bbk and dropped 2 seconds and gained nearly 8 mph in the 1/8 mile, was my first "race" engine and have took good care of it, so this winter going to tune the block and see if i can push 60+mph in the 1/8 mile 
catch ya in 2013
-Ben
... ok let me explain, its a 50mm tawain bore (82cc w stock crank) it maynot be the best bore but here is why i say this... it was my first bbk and dropped 2 seconds and gained nearly 8 mph in the 1/8 mile, was my first "race" engine and have took good care of it, so this winter going to tune the block and see if i can push 60+mph in the 1/8 mile catch ya in 2013
-Ben
-
kryptonite
- Spree
- Posts: 125
- Joined: Sun Jun 20, 2010 12:26 pm
- Location: Hemlock, MI
Re: the best bore kit
hehehe its a standard 50mm tawain MH bore
Re: the best bore kit
Polini/malossi, what about Fabrizi, i still have a 82cc engine-they also have a 92cc kit, not cheap but will smoke any kit out there
some people dream of speed, i own your dreams!
-
makadangdang
- Noob
- Posts: 17
- Joined: Wed Apr 21, 2010 10:24 am
- Location: HAWAII
Re: the best bore kit
I have a unported polini corsa thats been on my af16 for nearly ten years now, havnt done anything what so ever to maintain it. the top of the piston, the head, and the exhaust port were polished to a mirror finish before i installed it. i really dont know if its the "best" but it's been very reliable for me.