Gauge cluster for my spree

patthesoundguy · Post by **patthesoundguy** » Sun Nov 11, 2012 2:56 pm

I liked the analog tach but I found the digital ones online for $16 free shipping so 8 got one for both machines. And every one needs a cylinder temp gauge.

: uploadfromtaptalk1352663721611.jpg (85.19 KiB) Viewed 4476 times

now to wire the two gauges and clean the fab work and paint it.

Sent from my LG-C800G using Tapatalk 2

87spree70superbee · Post by **87spree70superbee** » Sun Dec 02, 2012 7:12 pm

Whoa... Where did you get the analog tach? Is it accurate?

abreen89 · Post by **abreen89** » Sun Dec 02, 2012 8:19 pm

you should sell these!

Wheelman-111 · Post by **Wheelman-111** » Sun Dec 02, 2012 11:18 pm

Greetings:

Looks good. Where's the TT CHT from?

patthesoundguy · Post by **patthesoundguy** » Sun Dec 02, 2012 11:43 pm

Wheelman-111 wrote:Greetings:

Looks good. Where's the TT CHT from?

I got it on ebay

Sent from my Nexus 7 using Tapatalk 2

patthesoundguy · Post by **patthesoundguy** » Mon Dec 03, 2012 1:03 am

87spree70superbee wrote:Whoa... Where did you get the analog tach? Is it accurate?

The analog tach works but I have to keep adjusting the screw on the circuit board to make it work. It was pretty cheap so I don't mind, just drilled a hole in the case to get at it. I may just put a dot of hot glue on the screw and keep it from vibrating out of adjustment.

Sent from my Nexus 7 using Tapatalk 2

patthesoundguy · Post by **patthesoundguy** » Mon Dec 03, 2012 11:51 am

The tach came from eBay someone here on Tue board had one and gave me the link.
http://www.ebay.com/itm/New-52mm-Car-Ga ... 3a7c536fcc
Here is the digital tach
http://dx.com/p/2-1-lcd-tach-hour-meter ... 430-151352

Sent from my Nexus 7 using Tapatalk 2

87spree70superbee · Post by **87spree70superbee** » Mon Dec 03, 2012 12:50 pm

patthesoundguy wrote:The tach came from eBay someone here on Tue board had one and gave me the link.
http://www.ebay.com/itm/New-52mm-Car-Ga ... 3a7c536fcc

Sent from my Nexus 7 using Tapatalk 2

Do you know if it's accurate? I had a lot of reading problems with my Lawnmower... (I'm building a racer and it never worked right until I scrapped the single-cylinder engine for a dual cylinder.)

swimmingfree · Post by **swimmingfree** » Mon Dec 03, 2012 12:54 pm

Do you know if it's accurate? I had a lot of reading problems with my Lawnmower... (I'm building a racer and it never worked right until I scrapped the single-cylinder engine for a dual cylinder.)

2 stroke or 4 stroke???
swimmingfree

87spree70superbee · Post by **87spree70superbee** » Mon Dec 03, 2012 1:59 pm

swimmingfree wrote:Do you know if it's accurate? I had a lot of reading problems with my Lawnmower... (I'm building a racer and it never worked right until I scrapped the single-cylinder engine for a dual cylinder.)

2 stroke or 4 stroke???
swimmingfree

4-stroke Briggs and Stratton Opposed twin.
http://m.youtube.com/watch?v=NoAZCnd_CwY

patthesoundguy · Post by **patthesoundguy** » Mon Dec 03, 2012 2:54 pm

The analogue tach seems accurate as long as screw on the board inside stays put. I'll know when I glue it in place and test it a bunch. The digital tach is the way to go for accuracy for sure, and all it needs is to wrap the trigger wire around the plug wire and go and it works on just about anything with a small engine, you can set it for twins or single cylinder 4 stroke or 2 stroke.

Sent from my Nexus 7 using Tapatalk 2

Honda Spree and Elite 50 Forums

Gauge cluster for my spree

Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree

Re: Gauge cluster for my spree