Trying to get this "look" with my spree
Moderator: Moderator
Re: Trying to get this "look" with my spree
do you think this exhaust would work?
dio performance exhaust system
http://www.scrappydogscooters.com/Honda ... aelim.html
dio performance exhaust system
http://www.scrappydogscooters.com/Honda ... aelim.html
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Trying to get this "look" with my spree
not on a spree motor
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Trying to get this "look" with my spree
ok do you know what pipe i can buy for a stock spree engine?
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Trying to get this "look" with my spree
in the link given to on the previous page
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Trying to get this "look" with my spree
ill give it a shot
Re: Trying to get this "look" with my spree
I have decided to stretch my spree dio. If you have a look at this page here it shows the kit you can buy and what they supply.
http://japan.webike.net/products/2076503.html
The hardest part will be sourcing new rubber bushes to go into the mounting tubes.
TRU72 : how much of a stretch is on your bike?
http://japan.webike.net/products/2076503.html
The hardest part will be sourcing new rubber bushes to go into the mounting tubes.
TRU72 : how much of a stretch is on your bike?
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
Re: Trying to get this "look" with my spree
another thing is the back plastics over the rear wheels, do you have to cute those to get them smaller like how those are? or is there plastics you can buy like that?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Trying to get this "look" with my spree
yes you have to nible on it some blow the tail light...
frist i wood the out the motor mount and make it to the new length put it in ans see what else you need to do ...it a one step at a time thing ... talk to you dad welder friend and show him the photo ..
simmingfree
frist i wood the out the motor mount and make it to the new length put it in ans see what else you need to do ...it a one step at a time thing ... talk to you dad welder friend and show him the photo ..
simmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Trying to get this "look" with my spree
well after talking to a friend here, Im going to try and get more of those pipes.
if interested pm me, like i told him they are all hand made to order.
low ballers and cheapskates need not apply LOL!
if interested pm me, like i told him they are all hand made to order.
low ballers and cheapskates need not apply LOL!
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Trying to get this "look" with my spree
Greetings:
What pipes are these, Tru.
I'm both a low-baller AND a cheapskate, but I gotta know...
What pipes are these, Tru.
I'm both a low-baller AND a cheapskate, but I gotta know...
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Trying to get this "look" with my spree
...Mr. spreeeeee: Take the advice of these people and spend your money on something other than a Spree if you TRULY want a bike with the lowrider look.
Spree is best left alone and used as a utility vehicle in stock form.
I may be old and gray and totally disconnected with the cool world of lowrider scooters, but Spree is about the worst place to start when building a cool scooter.
ENGINE SWAP is a total must....rock-on....
Spree is best left alone and used as a utility vehicle in stock form.
I may be old and gray and totally disconnected with the cool world of lowrider scooters, but Spree is about the worst place to start when building a cool scooter.
ENGINE SWAP is a total must....rock-on....
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Trying to get this "look" with my spree
Motormike is right on, (ptsg bows to the wise Motormike) . I also think if you aren't the fabricator yourself I'd almost forget a project like making lowrider streched spree. Having wanted to do stuff like that as a kid having to rely on someone else to weld and fabricate things, I don't do it if I can't do it for myself now, it sucks to have other people doing it, you are at their mercy. Save your money up, buy some tools like a welder, chop saw, angle grinder and learn how to weld and go to town on somthin. Just my 2 cents
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock