Page 1 of 1

JDM Tails from Daywot

Posted: Sun Aug 04, 2013 1:09 am
by bfowler
Anybody have success with these tails?
Or any other suggestions on good sellers? Thanks.

Re: JDM Tails from Daywot

Posted: Sun Aug 04, 2013 7:55 am
by vette76
i like it. fits nice.

Re: JDM Tails from Daywot

Posted: Sun Aug 04, 2013 8:44 am
by cruzingratiot
JDM tailight plz help
viewtopic.php?f=3&t=27504

Re: JDM Tails from Daywot

Posted: Sun Aug 04, 2013 8:58 am
by deuce217
They worked great on my elite. Daywot is a great seller.

Re: JDM Tails from Daywot

Posted: Mon Aug 05, 2013 3:35 am
by Munstah666
bfowler wrote:Anybody have success with these tails?
Or any other suggestions on good sellers? Thanks.
^^^ just for info those tails daywot sells are just JDM copy from taiwan. When compared next to a REAL Stanley JDM tail, they look cheap and not as flushed. They do work and look okay.

Re: JDM Tails from Daywot

Posted: Mon Aug 05, 2013 4:02 am
by bfowler
Munstah666 wrote:
bfowler wrote:Anybody have success with these tails?
Or any other suggestions on good sellers? Thanks.
^^^ just for info those tails daywot sells are just JDM copy from taiwan. When compared next to a REAL Stanley JDM tail, they look cheap and not as flushed. They do work and look okay.
What about the ones from vt cycles? Any place to get some nice jdm tails?

Re: JDM Tails from Daywot

Posted: Mon Aug 05, 2013 6:59 pm
by Wheelman-111
Greetings:

I got mine from VT. It's a real Kymco and of high quality. Others have reported varying quality, including if memory serves those from DayWOT.
Check the wiring with a battery before cutting the scooter wires. It's easy to blow a fuse if incorrectly connected. Don't ax me how I know... :(

Re: JDM Tails from Daywot

Posted: Mon Aug 05, 2013 7:41 pm
by bfowler
Wheelman-111 wrote:Greetings:

I got mine from VT. It's a real Kymco and of high quality. Others have reported varying quality, including if memory serves those from DayWOT.
Check the wiring with a battery before cutting the scooter wires. It's easy to blow a fuse if incorrectly connected. Don't ax me how I know... :(
Haha I read about that when I was reading over the flash builds. Looks like I'll be ordering it from VT. Too bad I NEVER seem to get a reply from them via email. Maybe calling works better?

EDIT: YAYYYY finally got a reply! So excited.

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 1:59 pm
by bfowler
Alright I'm stuck, someone help me decide. Should I go with the smoke jdm tails or regular jdm tails????? I don't like clear for sure. But can't decide between regular or smoked. What do you guys think?!

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 2:38 pm
by LMH
Get the ones from VT cycles.

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 3:20 pm
by paulpauly7
go smoked they look awesome

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 3:28 pm
by LMH
Smoked looks best, kymco never made a clear one also.

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 7:32 pm
by cruzingratiot
I think the smoked looks better
from my bike
un smoked
Image
smoked

Re: JDM Tails from Daywot

Posted: Thu Aug 08, 2013 10:42 pm
by bfowler
cruzingratiot wrote:I think the smoked looks better
from my bike
un smoked
Image
smoked
Hey thanks for those pictures. Definitely going with the smoked after seeing those.

Re: JDM Tails from Daywot

Posted: Fri Aug 09, 2013 12:30 am
by deuce217
Dang those look good. I thought smoked would be more blacked out. I like the smoked version and would have chosen those if I did it over.