Quick question... Want to know u rollers/slider weights u running..
I was using all 5g. Just went to 5g/6g in seeing 11300 rpms on the top end per MVS my bore with his work is able to hit 12k+ should I lower my weighs ?
100cc an up stroker rollers
Moderator: Moderator
-
Peteyparado
- Spree
- Posts: 280
- Joined: Fri Feb 26, 2016 4:02 am
- Location: Hawaii
100cc an up stroker rollers
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
-
1man8scoots
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: 100cc an up stroker rollers
If you drop roller weight you better hang on it will be more of a handful off the line. The thing is you will lose top end mph usually. Might lose 2 mph or something if you don't go too light.
-
Peteyparado
- Spree
- Posts: 280
- Joined: Fri Feb 26, 2016 4:02 am
- Location: Hawaii
Re: 100cc an up stroker rollers
Ok.. I just got my ZX TRANS in. I'm happy the way it is..1man8scoots wrote:If you drop roller weight you better hang on it will be more of a handful off the line. The thing is you will lose top end mph usually. Might lose 2 mph or something if you don't go too light.
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph