Page 1 of 1

New Member from Spain with a 1989 Honda Vision Met-In 75cc

Posted: Thu Jun 01, 2017 2:19 pm
by Vision75
Hi,

My nick is Vision75 and this is my 1989 Honda Vision Met-In 75 cc (SA75K).

Image

Image

Image

Image

Kindest regards from Spain! :hi:

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Thu Jun 01, 2017 7:06 pm
by bonesv
iBienvenido! We don't get to see many scooters from Spain. Especially the sa75 which is very similar to our sa50 here in the usa. Your scooter is very nice and clean, and I gather it has the ability to travel along at about 50 or so miles per hour/80 kph? We have to spend money and work hard to get up to that kinda speed! lol ; ) Do you have any helpful tips for us? Many here are learning about these type of scooters, or sharing our knowledge with other forum members. Some are in search of hard to find parts or information. If you are having trouble, just ask and maybe someone could help. If you have need of some oem Honda parts for it, there is the web site cmsnl.com. https://www.cmsnl.com/honda-sa75-vision ... partslist/
There are not many items left but you may find it useful. I'm sure there are many other parts sources and if you care to share a few go right ahead! Thank you and come back often!

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Fri Jun 02, 2017 10:31 am
by benji
That is a cool bike!

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Sun Jun 04, 2017 4:12 pm
by motormike
Greetings Nick (?)..Vision 75... :hi:
Always happy to see new members, especially from the continent.
We value your input and want your scooter !... :wink:
Please mail to "motormike, USA"... :urban:

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Sun Jun 04, 2017 5:40 pm
by ped
Hola como estas. Hi how are you. Nice looking scooter :thumbwink: , Really like the speedo :smile:

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Tue Jun 06, 2017 2:46 am
by cancunia
That's a nice looking scooter, seems that the 75cc version was only sold in Spain. Do you have any details about size & weight? It would be interesting to know if that engine would fit into a 50cc Vision! Maybe I'll get some friends I have near to Malaga to look out for one.

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Fri Jul 07, 2017 10:35 am
by Vision75
Thank you very much for such a warm welcome!

:jack: Few tips could I teach you, by now; I bought it last May and it's my first twist an go scooter (I usually ride classic Vespas and Moto Guzzi motorcycles). We're still getting along with each other! :wink:

Top speed is about 75 km/h (46-47 mph); transmission was set aiming mostly on acceleration, not on speed.

In addition to engine size, other main differences with the SA50 model are retractable footrests for the pillion passenger, wheel rims, greater tyres (3,50X10"), greater size of the front brake drum, two pieces exhaust (and so is much easy to remove the rear wheel) and speedometer (scale 80 km/h).

For those who wanted to know about sizes:
Length: 1730 mm
Width: 650 mm
Axle Distance: 1210 mm
Weight: 81 kg

:hi:

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Sat Jul 08, 2017 8:10 am
by noiseguy
I was just in Barcelona. A lot of scooters there...

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Sat Jul 08, 2017 3:35 pm
by Vision75
Well, I'm just about 300 km South far from there! Like a beer?

Re: New Member from Spain with a 1989 Honda Vision Met-In 75

Posted: Sun Jul 09, 2017 8:37 am
by noiseguy
Maybe next time ;)