Page 1 of 1
Replacement 44mm bbk Rings?
Posted: Sun Aug 19, 2018 11:07 pm
by ASpreeOfJoy
Does anyone know where I could get rings for the 44mm big bore kit? I will be in possesion of one soon and would like to make sure i can get rings if i need to. The kit itself is new.
Re: Replacement 44mm bbk Rings?
Posted: Mon Aug 20, 2018 9:45 am
by Meatball
What kit is it?? Cant you ask the seller if they sell rings for their kits? There are more specifics to rings than simply their diameter.
Re: Replacement 44mm bbk Rings?
Posted: Mon Aug 20, 2018 2:43 pm
by ASpreeOfJoy
Meatball wrote: ↑Mon Aug 20, 2018 9:45 am
What kit is it?? Cant you ask the seller if they sell rings for their kits? There are more specifics to rings than simply their diameter.
The kit is coming from a local guy it has instructions about cutting the head but I didnt hear a brand yet. Worst case I was going to measure the piston and rings with digital calipers and order the closest thing from husqvarna.
Re: Replacement 44mm bbk Rings?
Posted: Mon Aug 20, 2018 4:06 pm
by Meatball
Good luck wit dat.
Re: Replacement 44mm bbk Rings?
Posted: Tue Aug 21, 2018 11:18 am
by ntonar
Meatball wrote: ↑Mon Aug 20, 2018 4:06 pm
Good luck wit dat.
Right, there is a bit more to than the diameter of a piston.
Re: Replacement 44mm bbk Rings?
Posted: Tue Aug 21, 2018 8:24 pm
by ASpreeOfJoy
I'll have the original rings in my possesion to measure, I've been watching videos on ring filing for a perfect fit. The rings are only incase I need a rebuild in the future if I mess the kit up.