Gates AX24 fits perfect!

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

Post Reply
ASpreeOfJoy
Goped
Goped
Posts: 58
Joined: Fri Jan 19, 2018 11:25 pm
Location: United States

Gates AX24 fits perfect!

Post by ASpreeOfJoy »

Finaly got my spree running so I figured a new belt was in order. I've seen people had rubbing issues with the gates but after removing the middle washer on the drive pulley it clears the rear tab by like 3mm lol. I didnt realise the sb50p clutches were way bigger than the regular sprees. I also got the ax24 on without removing the drive pulley and easily.
Attachments
Running with the ax24. Low idle and zero rub. The kick start misses every now and then but not too much of an issue.
Running with the ax24. Low idle and zero rub. The kick start misses every now and then but not too much of an issue.
rps20181011_191929.jpg (74.25 KiB) Viewed 6292 times
Had to force the spring open to seat the belt in the pulley and clear the rear case tab.
Had to force the spring open to seat the belt in the pulley and clear the rear case tab.
rps20181011_191852.jpg (82.62 KiB) Viewed 6292 times
What a difference!
What a difference!
rps20181011_191832.jpg (73.48 KiB) Viewed 6292 times
Post Reply