****Official Picture Post****

cccphonda · Post by **cccphonda** » Fri Apr 17, 2009 6:31 pm

My 86 elite deluxe all stock just missing right rear turn and carb cover

808stalion · Post by **808stalion** » Fri Apr 17, 2009 6:33 pm

now my 89lx with my mini stroked dio swap

SprEE*MP* · Post by SprEE*MP* » Fri Apr 17, 2009 7:15 pm

Dayum, all these beutifull elites make me wanna get one...but im stuck with my Spree,...

Kenny_McCormic · Post by **Kenny_McCormic** » Fri Apr 17, 2009 8:00 pm

The spree is a fine vehicle, if light city traffic is all you do.

veedubh20 · Post by **veedubh20** » Mon Apr 20, 2009 12:36 am

circusracer · Post by **circusracer** » Tue Apr 21, 2009 8:00 pm

This is my daughters Spree, I recently sprayed it flat black. She is 15 and can cruise 37 mph (gps) all day.

Dac · Post by **Dac** » Wed Apr 22, 2009 9:30 pm

I love the way that looks.
Awesome spree man.

circusracer · Post by **circusracer** » Wed Apr 22, 2009 9:50 pm

Dac wrote:I love the way that looks.
Awesome spree man.

Hey thanks Dac, she wants me paint the rims lime green next. Im a little iffy on that one.

SprEE*MP* · Post by SprEE*MP* » Thu Apr 23, 2009 12:07 am

how did you get 'er going 37mph?...just the basic mods?

veedubh20 · Post by **veedubh20** » Sat Apr 25, 2009 10:19 pm

circusracer · Post by **circusracer** » Sun Apr 26, 2009 9:50 am

SprEE*MP* wrote:how did you get 'er going 37mph?...just the basic mods?

I bought a 1987 engine off ebay, and did all the mods listed in my sig. Im 200#'s and I can run 35 on it with nice acceleration. I have not modded the pulley or put on a wider belt, but the motor does not seem rpm limited to me on none of my Sprees. It seem that to go faster I need more power. My slowest Spree runs 33 with me on it.

dreamer1uk · Post by **dreamer1uk** » Sun Apr 26, 2009 8:19 pm

What painting steps did you take to paint those parts circusracer? And how is the paint holding up?

I once tried to paint several interior peices of my Mustang's interior but it didnt hold up too well.

Thanks!

circusracer · Post by **circusracer** » Sun Apr 26, 2009 9:33 pm

First I used goo gone on the decals, then I sanded with some 200 grit to smooth out the rough areas. Then I scuffed up everything with some brown scotch brite, next I wiped it clean with some paint thinner. Sprayed a light coat of primer, then hit it the flat black. Now my son wants the other painted flat yellow

dreamer1uk · Post by **dreamer1uk** » Sun Apr 26, 2009 10:37 pm

Hey again,

Did you use a clear coat too?

Ive never had much luck with rattle can clears...

bakaracer · Post by **bakaracer** » Mon Apr 27, 2009 4:08 am

got to ride my bike today.so I figure I take a pic of it.

Honda Spree and Elite 50 Forums

Official Picture Post

just for fun