Page 1 of 1
Want to swap my spree with a 94 elite
Posted: Thu Nov 15, 2018 7:34 pm
by Novaone4
I have a 86 spree and a 94 elite and want to swap the motor out on the spree to the elite! Do I have to swap wire harness? What do I need to do the swap. Some help please and thank you
Re: Want to swap my spree with a 94 elite
Posted: Thu Nov 15, 2018 8:32 pm
by bonesv
The search feature is available for info on your questions. Upper righthand corner-type in youe search word and just read thru some of the posts, there are thousands of them. I personally do not have experience with the spree swap. Welcome and good hunting!
Re: Want to swap my spree with a 94 elite
Posted: Fri Nov 16, 2018 12:09 am
by motormike
Here's a LINK for example>
http://www.hondaspree.net/phpBB3/viewto ... nt#p305774
You will find 432 matches for a Search of the words "Spree motor mount"
The motor mount is the first and most critical place to start when considering a Spree/AF16 swap.
I am not experienced in doing this swap, so research is your friend, but there are a couple guys here that will chime in to give you some advice and assistance along the way. Good luck sir...mm...
Re: Want to swap my spree with a 94 elite
Posted: Sat Nov 17, 2018 7:41 pm
by Meatball
Spree wiring harness works great with Elite motor swaps. You will just have to swap out a few connector plugs. Very simple.