Honda Spree and Elite 50 Forums

Posted: **Sat Jul 09, 2022 5:33 pm**

Have what was sold to me as a 1988 elite but I belive is an imported PAL. Kickstart spindle is all torn up and starter is toast. I have no problem starting with a drill. Need to buy a new spindle with all the teeth intact. Any suggestions are appreciated. Also I purchased a starter that was identical and bolts up turn. But I belive its the wrong direction as the bendix does not jump out..the bendex appears to be in good working order.

Posted: **Thu Jul 14, 2022 1:04 pm**

Hi,
If the belt cover looks like below, it should nail it as a Pal. In that case you will not want an NB50 starter spindle or starter.

Check partsfiche and compare P/N's with the SB50, those parts may be compatible.

: member_honda_pal_variated.jpg (183.77 KiB) Viewed 877 times

--

The pic above is from an old member's thread here. http://hondaspree.net/phpBB3/viewtopic.php?t=5707

Honda Spree and Elite 50 Forums

In need of 1988 nb50 starter spindle and electric starter

In need of 1988 nb50 starter spindle and electric starter

Re: In need of 1988 nb50 starter spindle and electric starter