Hi all,
I have a 1985 honda spree. Recently took off the rear wheel. I am curious as to what the rear torque spec is. Thanks in advance for your help.
Rear Axle Torque Value for 1985 Honda Spree
Moderator: Moderator
Rear Axle Torque Value for 1985 Honda Spree
Andrew
The Spree Guy
"Life would be more fun
if everyone drove a moped"
1985 Honda Spree
- Speed Pulley from SSS
The Spree Guy
"Life would be more fun
if everyone drove a moped"
1985 Honda Spree
- Speed Pulley from SSS
-
Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Rear Axle Torque Value for 1985 Honda Spree
Greetings:
Specs are in the FSM available on this board in that section. SA50 is around 60 Ft.-Lbs, likely the same on the Spree. A dab of Blue Loctite and 50 should be fine.
Specs are in the FSM available on this board in that section. SA50 is around 60 Ft.-Lbs, likely the same on the Spree. A dab of Blue Loctite and 50 should be fine.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Rear Axle Torque Value for 1985 Honda Spree
Hey, thanks a bunch Wheelman!
Andrew
The Spree Guy
"Life would be more fun
if everyone drove a moped"
1985 Honda Spree
- Speed Pulley from SSS
The Spree Guy
"Life would be more fun
if everyone drove a moped"
1985 Honda Spree
- Speed Pulley from SSS