transmission question

edwardzx7 · Post by **edwardzx7** » Thu Jun 26, 2008 10:12 pm

am i missing some parts????finally got the bolt off(torque wrench set at 150lbs and a 5lb hammer).i'm reading that there is springs in here??did i take off the wrong one or parts just not there.been riding it ever since i had it like this.[img=http://img179.imageshack.us/img179/6498 ... ea1.th.jpg],[img=http://img205.imageshack.us/img205/4505 ... vy9.th.jpg],[img=http://img212.imageshack.us/img212/9076 ... qr6.th.jpg],[img=http://img255.imageshack.us/img255/8655 ... io8.th.jpg].

CharlotteSpreeRider · Thu Jun 26, 2008 10:22 pm

It's the next thing. You just got the bell off, that's the easy part. Grab hold of that next piece under the thing you just took off and yank on that. You'll find a REALLY tough nut to remove, but once you get that one off, you'll find those springs.

-aseigler

Keoni · Post by **Keoni** » Thu Jun 26, 2008 11:46 pm

Just to make sure you know this and haven't forgot about it remember that the center/compression spring is under tension and the clutch will come flying off at you if you aren't holding it down when removing the nut and trust it it does hurt ALOT.

edwardzx7 · Post by **edwardzx7** » Fri Jun 27, 2008 11:57 am

took all that apart,nothing poped out, thats why i thought i was missing something.thanks for the heads up.i got a spare in the backyard that i'll paint and swap all my parts to. pics to come.

edwardzx7 · Post by **edwardzx7** » Fri Jun 27, 2008 5:50 pm

fixed it!painted the other panel(finally!) felt good to ride again!alot of older people smiling,waving,and pointing.got it to 33mph no bad.