NB50 AERO: Source for 9:1 Gears

scooterwerx · Post by **scooterwerx** » Sat Nov 01, 2008 10:50 am

haha i was just about to say how filthily cheap they had those polini cylinder kits for! i have the 16/32 gears, and when i rotate my back wheel, the clutch bell goes about 8 times for every 1 wheel rotation, so i think its a little over 8:1...

devenex · Post by **devenex** » Sun Nov 02, 2008 9:36 pm

So they're still selling gears for the mid-80's Aeros and Elites? How much are they?

scooterwerx · Post by **scooterwerx** » Sun Nov 02, 2008 10:03 pm

i believe mine were about 70 bucks, dont quote me though.

scooterwerx · Post by **scooterwerx** » Sun Nov 02, 2008 10:07 pm

as of right now on malossis website they are 52 euros, so i think it is around 70$$

devenex · Post by **devenex** » Mon Nov 03, 2008 2:01 am

So is the motor strong enough that like the dio you can do gears and a pulley w/o a big bore? Or would takeoff just be nonexistant?

Wheelman-111 · Post by **Wheelman-111** » Mon Nov 03, 2008 10:02 am

Greetings:

This is where I found some gears:

http://www.malossionline.com/en/catalog ... 0/gears-67

Evidently a Peugeot shares some running gear with the Aero, AKA Vision 50 in Europe.

I had less success finding an US distributor website from which to order. Roselle? Can you post or PM me an URL?

scooterwerx · Post by **scooterwerx** » Mon Nov 03, 2008 11:28 am

yeah, i probably would not do the gears unless the motor is also modified...the stock motor feels good with the stock gears, even with cylinder kit and porting and many other mods, the gears take away some launch. high stall clutch/clutch springs help alot.

roselle european imports---1 888 433 1338
just tell them its a personal order, usually they only deal with dealers, but they will sell to the public

Wheelman-111 · Post by **Wheelman-111** » Mon Nov 03, 2008 12:16 pm

Greetings:

Thanks. I called the 888 #. The website is Malossi USA. I really appreciate all the guidance. I'll get to tear into the Aero later this week or next.

Clivester · Post by **Clivester** » Tue Nov 04, 2008 5:38 pm

This is why I love this forum!

Clive.

SpyderMike · Post by **SpyderMike** » Tue Nov 04, 2008 10:28 pm

do you have to call for prices? im not seeing any

Wheelman-111 · Post by **Wheelman-111** » Wed Nov 05, 2008 9:36 am

Greetings:

Scroll right a skosh. It says E63.28. WIth the current exchange rate on the US dollar, that' about $51,248.

Honda Spree and Elite 50 Forums

NB50 AERO: Source for 9:1 Gears

Malossi Online Site

Roselle/Malossi USA

Prices